Keith_PDX
Well-Known Member
- Joined
- Mar 13, 2017
- Threads
- 8
- Messages
- 159
- Reaction score
- 46
- Location
- Portland, Oregon
- Vehicle(s)
- 2017 GT/PP
Unfortunately I didn't snap pictures of the tweeter install or the rear deck. Tweeters basically fit right in the stock location and I used hot glue to keep them in place. The tweeters have a designated wire ran to the component set crossover. The OEM wire was reused for the door midbass as I didn't want to mess with getting wire through the door umbilical. The rear deck is basically the same install as the front; cut up the OEM speaker and use it as a mounting base. They were throw away items anyway and this allowed me to use factory wiring connectors and didn't have to purchase adapters.
Sub...carpet could have been a better match but it was what I could find.
Speaker showing how I used the OEM as a mounting adapter and soldered the new speaker to the OEM plug.
Amp setup....High level on the right running up to the stereo. Power on the left running to the passenger kick panel gromet. Used the upper left seat mounting point as the ground. Sub wire ran under the carpet up the tunnel, under the rear seat and to the box.
Sub...carpet could have been a better match but it was what I could find.
Speaker showing how I used the OEM as a mounting adapter and soldered the new speaker to the OEM plug.
Amp setup....High level on the right running up to the stereo. Power on the left running to the passenger kick panel gromet. Used the upper left seat mounting point as the ground. Sub wire ran under the carpet up the tunnel, under the rear seat and to the box.
Sponsored