FP passenger air oil separator hose

[MrCincinnati]

Anyone install this and have an issue with the engine side hose being too long? Note the crimped bend?

Sponsored

 

[96cobra]

Looks like a warranty killer to me!!

 

[MrCincinnati]

Looks like a warranty killer to me!!

Lol exactly. I think the issue is the position of the air intake changed for 2017

 

[mkonrad]

Until I can get out to check, I remember that like most people here I had to invert one hose. Can't remember if it was driver or passenger though.

Edit. It was passenger.

 

[MrCincinnati]

Until I can get out to check, I remember that like most people here I had to invert one hose. Can't remember if it was driver or passenger though.

Edit. It was passenger.

Thanks!
Inverting does look better. Still slightly nervous about airflow thru this bend:

 

[Zitrosounds]

Thanks!
Inverting does look better. Still slightly nervous about airflow thru this bend:

Nope!!! That's it! Works like a champ!

 

[Ninjak]

Indeed. I have the FP passanger side as well, was my first mod, and I have had zero issue so far. Did the exact same thing.

 

[MrCincinnati]

Thanks guys!

 

[Shift]

Looks like a warranty killer to me!!

You kid. Your joke however will go right over Fords head...

 

[gtcrackers]

Thanks for the picture of the inverted hose on the passenger side. I did mine today, and that works better!

 

[MrCincinnati]

Thanks for the picture of the inverted hose on the passenger side. I did mine today, and that works better!

Glad it helped :cheers:

 

[Zombo]

Thanks!
Inverting does look better. Still slightly nervous about airflow thru this bend:

I wouldn't be concerned. That hose is on the vacuum side of the intake; a large percentage of the time, it will be sucking like a....

 

[Kurac]

Do you guys that have these catch cans have to remove the whole assembly and remove the screw fasteners? Why not go with a traditional version like JLT where you just unscrew the Can from the bottom while leaving the hoses intact?

 

[MrCincinnati]

Do you guys that have these catch cans have to remove the whole assembly and remove the screw fasteners? Why not go with a traditional version like JLT where you just unscrew the Can from the bottom while leaving the hoses intact?

I went with the FP ones because they look stock. The hoses are quick release on both ends, you just release the hoses from the can, pull the can out and dump it out the side.

 

[50 Deep]

A recent unrelated convo I had with [MENTION=19066]Epiphany[/MENTION] led Me to this.

http://m.uprproducts.com/mustang-pro-series-hose-upgrade-ford-racing-separator-11.html

Sponsored