DFWStangGuy
Well-Known Member
- Joined
- Apr 18, 2016
- Threads
- 8
- Messages
- 120
- Reaction score
- 19
- Location
- Fort Worth, TX
- First Name
- Chad
- Vehicle(s)
- 2019 Oxford White GT
- Thread starter
- #1
So I received the Ford Racing hood struts I ordered from GYeomans Ford. Unfortunately, the instructions that came with them are confusing at best. I installed the lower mounts backwards and had to turn them around so they line up with the upper mounts. I was able to get the driver's side done with no issue, but when I attempted to loosen the passenger side bolt and turn it 180 the hardware came off inside the hole. I tried taking the wheel off and removing the fender liner to try and get the pieces to fall out but I'm at a loss. Anyone else have the same issue or know how to get the pieces out without taking the fender off? Any help would be appreciated. By the way, I did email the seller to see if they would be able to replace the hardware but will not hear back from them until tomorrow sometime.
Sponsored