Kahboom
Kahboom
- Joined
- Nov 28, 2014
- Threads
- 26
- Messages
- 1,206
- Reaction score
- 184
- Location
- Cathedral City, CA
- Vehicle(s)
- 2015 Mustang GTPP, Recaros/2014 Explorer Sport 4X4
- Thread starter
- #1
Remove right passenger side small black panel between door and glove box, then remove driver side small trim panel between door and panel. On the right side of the steering wheel pull from the top of the panel down the small black panel it will hang, remove center trim panel above stereo. Back to driverside remove four screws, then on right side of steering wheel remove one screw. Head light switch panel after removing screws pull panel and let it hang. Top panel on the left side of steering wheel pull top forward and remove last screw. Pull steering wheel all the way forward and down and lock into place. Pull the trim piece up on the top of the steering wheel then pull it into the center gap of the steering wheel opening, pull the center cluster benzel out it is attached to the left vent which has clips. After removing pull cluster out on the right side it is attached cable press in the tab to remove. Install new cluster reattach cluster cable and use ziptie if needed on the right side of the cluster to hold line in place. Reverse process to reattach all pannels.
Using Forscan to disable all unneeded premium features that are not on the base model.
1)
CTA disabled
720-01-01 xxxx xxxx *xxx 7 --> 6
2)
BLIS disabled
720-03-01 *xxx xxxx 6 --> 2
3)
Collision Avoidance...
720-04-01 *xxx xxxx xxxx E --> 0
720-01-02 xxxx *xxx 5 --> 1
4)
ACC
720-01-01 x*xx xxxx xxxx F --> C
5)
720-01-02 xxx3 xxxx - Easy Entry/Exit disabled in IPC
720-01-02 xxxB xxxx - Easy Entry/Exit enabled in IPC
6)
720-02-02 08xx xxxx - Rear Park Aid disabled in IPC
720-02-02 1Axx xxxx - Rear Park Aid enabled in IPC
Sponsored
Last edited: