Sponsored

bad news for people who want to widen their wheels.

Thread starter jimmerheck
Start date Aug 2, 2018
Watchers 8

fordfred

Member

#31

Paid $125 to have th backside of the wheels painted.

Sponsored

z06psi

Well-Known Member

#32

Weldcraft = Awesome!

Had my Hybris widened 2". They have been great for 2+ years.

LSchicago

Well-Known Member

#33

fordfred said:
No spacer. 305 40 18 555r

What was the original rim width, and how much did you add? How much tire clearance left on the inside?

2018 Mustang GT/A10. Mid level 301A, Kona Blue, Blk Acc Pack, Active Exhaust, 3.55LS. 11.92/118.39 when bone stock on factory 255's. Best to date: 10.20/138 with a Procharger P1X/4.00" pulley (let off early, ground issue)
*Mods: Procharger Stage 2 P1X, ~~4.5"~~ ~~4.25",~~ ~~4",~~ 3.5" Griptec 17+PSI on E85, LUND 93/E85 Tunes, MAK 4.5" Hurricane inlet. Jackal JR Fuel system with twin walbro 525's, PTFE lines & rails, FIC 1000's, NGK 6510 (.024), Reische 170*.
Steeda STH starter kit & drag springs, GT350 Axles & Steeda Rear Diff support with black bushing inserts.
CM components rear seat delete, Steeda Lightweight front bumper bar, DSS aluminum DS.
SVE SP2 19X10 with 285/35 Nitto Invo's & 17X10.5 Drag Star's with 315/50/17 ET Street R's.
Cervini's C series grilles, Big Worm Graphics, Motorsport hood vents.

fordfred

Member

#34

LSchicago said:
What was the original rim width, and how much did you add? How much tire clearance left on the inside?

Went from 8 to 10. It’s tight on the inside, probably less than 1/2”. I wouldn’t try a wider tire w/o a spacer.

LSchicago

Well-Known Member

#35

fordfred said:
Went from 8 to 10. It’s tight on the inside, probably less than 1/2”. I wouldn’t try a wider tire w/o a spacer.

Thanks, mine are 8.5. Nice to know we can go 10" wide without a spacer.

2018 Mustang GT/A10. Mid level 301A, Kona Blue, Blk Acc Pack, Active Exhaust, 3.55LS. 11.92/118.39 when bone stock on factory 255's. Best to date: 10.20/138 with a Procharger P1X/4.00" pulley (let off early, ground issue)
*Mods: Procharger Stage 2 P1X, ~~4.5"~~ ~~4.25",~~ ~~4",~~ 3.5" Griptec 17+PSI on E85, LUND 93/E85 Tunes, MAK 4.5" Hurricane inlet. Jackal JR Fuel system with twin walbro 525's, PTFE lines & rails, FIC 1000's, NGK 6510 (.024), Reische 170*.
Steeda STH starter kit & drag springs, GT350 Axles & Steeda Rear Diff support with black bushing inserts.
CM components rear seat delete, Steeda Lightweight front bumper bar, DSS aluminum DS.
SVE SP2 19X10 with 285/35 Nitto Invo's & 17X10.5 Drag Star's with 315/50/17 ET Street R's.
Cervini's C series grilles, Big Worm Graphics, Motorsport hood vents.

69mach1-395

Well-Known Member

#36

I went to 10.5 with no issues I can see or hear...it may be wheel specific though.

Sponsored

You must log in or register to reply here.

Share:

Facebook Twitter Reddit WhatsApp Email Link