American Racing Headers - New systems available

[v8hgt]

Perfect. Nemesis should be able to get you set up with a header system for your car without trouble.

Thank you,
John

Do any of your UK dealers do fitting as I can't see anything on the nemesis site about fitting and this is one thing I don't want to attempt myself on our rhd cars!!
Have you got GT101 or modurstang as dealers?

Sponsored

 

[A.R. Headers]

We currently only have Nemesis set up.

 

[A.R. Headers]

bump!

 

[v8hgt]

I’ve got your American thunder cat back system installed at the moment (H pipe version)
If I want to fit your headers but loose the bottleneck what parts do I need to order to connect as much of my existing system to the headers? Does the bottleneck remove part go all the way back to the axle or do I need to saw off the middle pipe just behind the H pipe joiner? Or am I stuffed and have to live with the bottleneck?

 

[A.R. Headers]

I’ve got your American thunder cat back system installed at the moment (H pipe version)
If I want to fit your headers but loose the bottleneck what parts do I need to order to connect as much of my existing system to the headers? Does the bottleneck remove part go all the way back to the axle or do I need to saw off the middle pipe just behind the H pipe joiner? Or am I stuffed and have to live with the bottleneck?

Hi there v8hGT,

You would need the Long system which would connect to the axle back section of your current system.
https://americanracingheaders.com/c...ducts/mustang-5-0l-coyote-2015-up-long-system

You have this system correct?
https://americanracingheaders.com/collections/mustang/products/mustang-5-0l-coyote-2015-up


John
ARH

 

[v8hgt]

Hi there v8hGT,

You would need the Long system which would connect to the axle back section of your current system.
https://americanracingheaders.com/c...ducts/mustang-5-0l-coyote-2015-up-long-system

You have this system correct?
https://americanracingheaders.com/collections/mustang/products/mustang-5-0l-coyote-2015-up


John
ARH

Thanks John. Thats the cat back I have so I will order the Catted long system with H pipe when its available in the UK via Nemesis.

 

[fionic]

So if I already have an ARH catback and I want to go to the full headers on back system, which kit do I need to buy to mate up to my catback ? I assume direct connect ?

I was going to ask the same thing. I think we need to get the "bottleneck eliminator".

I'm assuming no cutting would be required to fit the ARH catback...hopefully.

 

[A.R. Headers]

I was going to ask the same thing. I think we need to get the "bottleneck eliminator".

I'm assuming no cutting would be required to fit the ARH catback...hopefully.

Optimally you would want the Long System, as the X would be properly located in the mid-pipe.

Sponsored