American Muscle sale.

[ForTehNguyen]

Mine are 19x10 +45mm offer. I don't think they'll fit with 274/40/19 on them. I have 5mm spacers, and there ain't much breathing room.

i put 275/40/19 on my 19x10 square Axioms with 5mm spacer, fits fine. I can fit my finger in the clearance between the strut. Definately need the 5mm spacer for insurance

http://www.mustang6g.com/forums/showpost.php?p=1167847&postcount=11736

Sponsored

 

[Built4Speed]

I just my holgens. Anyone else get a 10" wheel up front. It is just about touching the strut. I don't think it will clear when the tires get on Without a spacer. I don't know what size to get. Hopefully 5mm will do it.

What size tire are planning on using?

 

[bigred90gt]

i put 275/40/19 on my 19x10 square Axioms with 5mm spacer, fits fine. I can fit my finger in the clearance between the strut. Definately need the 5mm spacer for insurance

http://www.mustang6g.com/forums/showpost.php?p=1167847&postcount=11736

Interesting. I couldn't fit my finger if I tried. There is a few mm clearance st best.

 

[15RRGT]

Is the programming tool really necessary? When I replaced my stock wheels with the Stance wheels, the car learned on it's own.

Shouldn't need it. I only mentioned it because it was part of the package I bought, so I wanted to make sure I received it since I paid for it.

Installed the 20x9 and 20x10 RTRs last night, love them!

 

[gtcs07]

When i put my amrs on it self learned the sensors pretty quickly... That being said my tool will be here today

 

[AMAlexLazarus]

Do i need to send you a picture?

I just wanted to have it noted on the order but that would be greatly appreciated if you could. Feel free to have it posed up here.

Can somone send me the discount code?

[MENTION=11970]v8ter[/MENTION] - I'll shoot it over right now.

had some nicks on mine, used touch up paint from my IS350, hardly see it

[MENTION=15347]ForTehNguyen[/MENTION] - Sorry to hear about this! If there's anything I can do on my end.

All PM's have been replied.

Alex

 

[Built4Speed]

Only one chip?? Count your blessings. All of mine have at least one chip / scrape / scratch.

Where these wheels supposed to be sold as returns / irregulars / cosmetically damaged?

I'm extremely disappointed.

American Muscle has gone ABOVE AND BEYOND to rectify my situation. This is the type of customer service that make people repeat customs.

Thank you for handling this in a speedy manner with professionalism!

THANK YOU ALEX!!!

 

[AMAlexLazarus]

American Muscle has gone ABOVE AND BEYOND to rectify my situation. This is the type of customer service that make people repeat customs.

Thank you for handling this in a speedy manner with professionalism!

THANK YOU ALEX!!!

Thanks for the kind words and I'm sorry about the trouble again!

If there's ever anything I can help with please shoot me an email and I'm here to help.

Alex

 

[Hurricane]

Sale is back on! Different wheels this time around though. AM must be doing some spring cleaning to clear out the warehouse.

http://www.americanmuscle.com/special-sale-2-2015.html

 

[ForTehNguyen]

the charcoal PP wheels is what they shouldve looked like from the factory

 

[longbowsvt]

Ok guys I am at a crossroad. I took my car to the dealer today to get my mmd 551c 19" wheels installed and the fronts rub the outside of the calliper. The issue is the design of the 551 wheel. They put a lip in the center of the barrel to mount the valve stem in which is rubbing the calliper ever so slightly. I can mount the wheels and turn them but they rub just enough to make a noise. I could return them and go up to a 20" but I have already purchased new tires to mount on them. I am considering shaving the top of the calliper down slightly. I have the PP brembos and they seem pretty meaty, I don't think 1-2mm removed would hurt the calliper. Any ideas?

 

[Shouldhavegotthegt]

Get some hubcentric spacers. Cost about $20 for 5mm. No rubbing or vibrations. Better than grinding your calipers. I would mess with that.

 

[longbowsvt]

I have some 5mm spacers but they won't help as the inside diameter of the wheel is rubbing the top of the calliper not the face. I figured since I had 19" wheels factory that any 19" wheel would clear the brakes but not the case.

 

[ForTehNguyen]

strange, plenty of space with the 6 pistons on my 19' Axioms

 

[Aarron_M]

I have some 5mm spacers but they won't help as the inside diameter of the wheel is rubbing the top of the calliper not the face. I figured since I had 19" wheels factory that any 19" wheel would clear the brakes but not the case.

Yeah, that's not how wheel fitment works. You have to take into account spoke design, offset, width, size. Sounds like you might want to return them and get wheels that fit. I personally wouldn't grind down on my calipers.

Sponsored