Ambient Thermal Management
Well-Known Member
- Thread starter
- #1
Hello all, my name is Dave and I'm one of the new owners of Ambient Thermal Management. As many of you know ATM had been MIA recently and even went dormant in 2016. Well, in the beginning of 2017, ATM was acquired by new owners and since then we've been working hard to get ATM's products back into manufacturing as well as a new website ready. Our goal is to offer the same top quality Ecoboost FMIC's and charge pipe kits, while improving communication and customer service. And it gets better....our website is live! Check us out at www.atmspeedshop.com. No more waiting for group buys. Our products will continue to have the same top-notch, performance leading results, and now even have some improved finish options! We look forward to supporting the community with our current products and hopefully offering even more performance parts in the future.
Since this is the technical section I should post something technical Let's talk about our intercoolers.....You'll notice our FMIC's now have different finish options than before. They are now offered in powdercoat! Silver for the bold look and black if you want to go stealthy Other than the new finishes and appearance, our FMIC's continue to keep the same high-quality construction, superior cooling (in the mid 90%+ efficiency range) and low pressure drop due to our unique core design and rounded header bars. We are also the only stepped FMIC manufacturer that makes all of our cores in a one piece unit for the most efficient design. As you can see this intercooler is huge!
Now to our charge pipes......Our Ecoboost Charge Pipe Kit takes a lot of unneeded volume, bends and potential leak points out of your turbo system's factory plumbing. We designed these to be as straight as possible while removing the stock restrictions and bottlenecks, resulting in an increase of the efficiency of the system. Our kit also allows the ability to run either the stock diverter valve or a variety of aftermarket BOV's that can use a 1.5" hose adapter. And again the look of our products has been upgraded a bit!
Once again we're glad to be back and able to support you Ecoboost owners as well as the Mustang6g community. If you have any questions or would like to purchase feel free to PM us or check the Sponsor section where we'll be posting more information soon as well as individual pricing.
Since this is the technical section I should post something technical Let's talk about our intercoolers.....You'll notice our FMIC's now have different finish options than before. They are now offered in powdercoat! Silver for the bold look and black if you want to go stealthy Other than the new finishes and appearance, our FMIC's continue to keep the same high-quality construction, superior cooling (in the mid 90%+ efficiency range) and low pressure drop due to our unique core design and rounded header bars. We are also the only stepped FMIC manufacturer that makes all of our cores in a one piece unit for the most efficient design. As you can see this intercooler is huge!
Now to our charge pipes......Our Ecoboost Charge Pipe Kit takes a lot of unneeded volume, bends and potential leak points out of your turbo system's factory plumbing. We designed these to be as straight as possible while removing the stock restrictions and bottlenecks, resulting in an increase of the efficiency of the system. Our kit also allows the ability to run either the stock diverter valve or a variety of aftermarket BOV's that can use a 1.5" hose adapter. And again the look of our products has been upgraded a bit!
Once again we're glad to be back and able to support you Ecoboost owners as well as the Mustang6g community. If you have any questions or would like to purchase feel free to PM us or check the Sponsor section where we'll be posting more information soon as well as individual pricing.
Sponsored
Last edited: