Aggressive Fitment Thread

[2morrow]

Rays Gram Lights 57FXX 20x10 +35 275/30/20 Hankook Ventus Airlift Suspension

Wow!:eyebulge:

Sponsored

 

[FIXR7]

If I'm correct in saying those blue Vossen forged 20x12's are +50? Then using a 19x11 +30 would push them 7.3mm further out. Is this a bit much even with a 275 stretched over it?

 

[Paul@PKAUTODESIGN]

If I'm correct in saying those blue Vossen forged 20x12's are +50? Then using a 19x11 +30 would push them 7.3mm further out. Is this a bit much even with a 275 stretched over it?

Et 52 to 54 i believe.

You need to keep in mind a wheel grows on the inside, by loweringthe offset the wheel sits out more. I would highly recommend at lowest et 45 on a 11" and upwards to a et 55

 

[FIXR7]

Et 52 to 54 i believe.

You need to keep in mind a wheel grows on the inside, by loweringthe offset the wheel sits out more. I would highly recommend at lowest et 45 on a 11" and upwards to a et 55

Yes I realise how offset works but I'm wondering how close to the guard lip that 20x12 was at +50 or 52? Was there more than 7.3mm to spare?

 

[Paul@PKAUTODESIGN]

Yes I realise how offset works but I'm wondering how close to the guard lip that 20x12 was at +50 or 52? Was there more than 7.3mm to spare?

I dont believe so ill have to recheck but its a very tight fit.

 

[robwlf]

Rays Gram Lights 57FXX 20x10 +35 275/30/20 Hankook Ventus Airlift Suspension

damn nice man .. i seen your car at cars and coffee at the stacks last sun i have the magnetic that was parked beside the red auto flexed gtr .

 

[Paul@PKAUTODESIGN]

[MENTION=17905]Colin[/MENTION] have you thought about doing the grill delete upfront?

 

[Colin]

damn nice man .. i seen your car at cars and coffee at the stacks last sun i have the magnetic that was parked beside the red auto flexed gtr .

thanks man love that show!

 

[Colin]

[MENTION=17905]Colin[/MENTION] have you thought about doing the grill delete upfront?

i thought about it, but i might end up going with a different front bumper soon

 

[Paul@PKAUTODESIGN]

i thought about it, but i might end up going with a different front bumper soon

Gt350 front bumper ftw !!

 

[BigBen5.Oh]

Avant Garde m550, (which are for sale) 20x9+20 and 20x10.5+40

 

[Paul@PKAUTODESIGN]

Avant Garde m550, (which are for sale) 20x9+20 and 20x10.5+40

I like it

 

[Paul@PKAUTODESIGN]

295/30/19 Toyo R888R
Yokohama Advan GT Premiums 19x10.5 +15 square

The Function Factory 2016 Ford Ecoboost Mustang by The Function Factory, on Flickr

Had to go to SEMA literally hours before we got the wheels on. We will be lowering the car and adding more camber. Anderson Composites will be sending us rear carbon fiber fenders to free up some of that negative camber.

Very nice happy to see how she came out after our convo.
That's super badass

 

[H1shawn1]

Hey Guys, long time reader first time poster on this subforum.

I have really enjoyed skimming through this thread, and thought a new thread was in order.

We need a top ten most aggressive wheel fitment thread. I'd start it, but I feel many of the frequent posters of this thread would be better at it since I'm so new.

The list can be voted on and updated as we see more and more aggressive fitments and could encourage people to stretch the limits of what's capable on the S550.

If no one is willing to start it I will go ahead and do so, but I will need help in identifying who the current top 10 is.

 

[Paul@PKAUTODESIGN]

Hey Guys, long time reader first time poster on this subforum.

I have really enjoyed skimming through this thread, and thought a new thread was in order.

We need a top ten most aggressive wheel fitment thread. I'd start it, but I feel many of the frequent posters of this thread would be better at it since I'm so new.

The list can be voted on and updated as we see more and more aggressive fitments and could encourage people to stretch the limits of what's capable on the S550.

If no one is willing to start it I will go ahead and do so, but I will need help in identifying who the current top 10 is.

Well first off welcome to the board.

Second off that is a great idea and if need be we can post up the thread to start off if you want.

I know there is a aggressive fitment thread on the section already as well, have you seen it?

Sponsored