11GTCS
Active Member
- Thread starter
- #1
I've got a Chamberlain 3/4hp garage door that's worked fine up until I programmed my 2015 mustang to it. The issue is the opener wont respond to the commands from the buttons in the visor to open or close the door. This happens with my Mustang, '12 F150, and the remote that came with the opener that I use in my Fiesta (although this remote works more often than the buttons in the visors in the stang and f150, but still fails at times also). The problem is random, I'd say 99% fail rate in the mustang, 70% in the f150, and about 30% in the Fiesta. Things I've tried include changing the battery in the remote in the Fiesta, deleting all codes on the opener and visors and reprogramming all, cleaning the safety beam lens, changing the light bulbs on the opener, straightened out the signal receiver wire and have it pointing towards the garage door instead of just dangling. What else can I do short of buying a new opener? It almost seems as if the mustang corrupted the opener somehow because this problem didn't exist until the mustang came along...
Sponsored