kapiteinlangzaam
Well-Known Member
- Joined
- Jan 26, 2016
- Threads
- 123
- Messages
- 1,868
- Reaction score
- 710
- Location
- Netherlands
- Vehicle(s)
- 5.0 GT Coupe 6MT PP1
Looks good bro!
Yep, that's correct. Kelly from BMR was one of the first to point that out. Also, the bearing in the toe link is the same as the FP knuckle bearing. If installing adjustable toe links, you can press out the bearings from the factory toe links and install them in the knuckles to save from purchasing the FP knuckle bearings. :cheers:Added a few more steeda bits (diff bushings and subframe bushing supports). Decided to install the FP knuckle to toe link bearings while back there and killed the original bearing.
Also seems like my non-PP has PP toe links according to the part numbers? I thought that was a PP specific part.
Cool, thanks. I suspected that after putting them side by side but wasn't sure. Not adding adjustables, the bearings came with my FP track handling kit but I never got around to installing them until now. Looks like I have an extra pair of bearing and arms then.Yep, that's correct. Kelly from BMR was one of the first to point that out. Also, the bearing in the toe link is the same as the FP knuckle bearing. If installing adjustable toe links, you can press out the bearings from the factory toe links and install them in the knuckles to save from purchasing the FP knuckle bearings. :cheers:
I did as much of the car as I could. Did you consider the windshield too? I get mine done on all my cars and highly recommend it:Scheduled an appointment to have my front end wrapped in a clear protective wrap. getting the full front end. gotta protect that black paint from chips.
Details on that automatic shifter please.Got it delivered today and installed it today, thanks [MENTION=25687]Beith Performance Parts[/MENTION] I love the wheel, and will try it out later tonight. Plus better Pic as the sun goes down as well.
Details on that automatic shifter please.
Yes, that is correct, and it's a great shifter and much shorter than stock.Looks like white madness black on black
Which part number did you end up getting? Did you get the drain hose too? Thanks in advanceChanged the oil on my Mustang and girlfriend's Fusion. Installed Femco oil drain valves on both so future oil changes should be a breeze.
You'll enjoy it....Ordered a complete 3P Airlift kit.