What did you do to your S550 Mustang today?!

[Chef jpd]

That's a cool setup. How is the room inside of the box with the new speaker? How do the new and stock speakers compare in size?

The new speaker is dimensionally similar to the old, but with a much larger magnet and drastically higher quality. It's specifically a shallow mount sub

Forgot to mention that there is a screw in the back holding the old speaker. You will have to plug the hole. I used 3m tape.

Sponsored

 

[robertwsimpson]

purchased some 25mm coyote spacers for the front and 20mm for the rear off another member on here. pics to follow once I get them installed!

I am curious about 20mm on the rear. Let me know if you have to do anything with your wheel studs to get the wheel to fit back on!

 

[robertwsimpson]

The new speaker is dimensionally similar to the old, but with a much larger magnet and drastically higher quality. It's specifically a shallow mount sub

Forgot to mention that there is a screw in the back holding the old speaker. You will have to plug the hole. I used 3m tape.

interesting. I like rockford fosgate, but I like JL better. I wonder if I could get something bigger in...

 

[Elvis66]

If you have stock wheels ther won't be a problem..they have cut out pockets whare the studs fit in the stock wheels.

 

[Joelang33]

I am curious about 20mm on the rear. Let me know if you have to do anything with your wheel studs to get the wheel to fit back on!

wasn't aware I would have to mess with it... should just bolt on and fit perfect right...? :(

 

[Joelang33]

If you have stock wheels ther won't be a problem..they have cut out pockets whare the studs fit in the stock wheels.

on the black pp ones right??

 

[Elvis66]

Yes ...and sorry to disappoint you when you look at the inside of the stock rims it says made in China pretty disappointing LOL

 

[Asharus]

The GTPP wheels are made in 'Murica

 

[Elvis66]

After you put the spacers on ..the existing wheel studs will fit in these holes.

 

[Khyber]

100% plug and play swap. 6 bolts removes the sub
Out with the old , in with the new.
RF P3SD2-8 sub
RF P3S grill
Both from Amazon, $110

oh wow 100% replaceable?!?! and only $110... hmm on the wish list it goes.

 

[robertwsimpson]

Yes, there is some clearance on the surface, but it's only so deep. I have 25mm spacers and the wheel studs already stick out from those into those "pockets"

I'm wondering if 20mm will fit with no modification.

 

[GT Nate]

Installed this bad boy.....instant 50hp bump

 

[2morrow]

Installed this bad boy.....instant 50hp bump

:lol:Nice! I dig the red trim on the interior panels.

 

[Dsquared]

Yes, there is some clearance on the surface, but it's only so deep. I have 25mm spacers and the wheel studs already stick out from those into those "pockets"

I'm wondering if 20mm will fit with no modification.

There is another thread in the Wheel and Tire forum about this. I have 20mm spacers on all 4 of my PP wheels. You will have to trim the wheel studs 5 mm. No way around it.

 

[Mustang_Lou]

There is another thread in the Wheel and Tire forum about this. I have 20mm spacers on all 4 of my PP wheels. You will have to trim the wheel studs 5 mm. No way around it.

Actually only need to trim 3 mm as a 23 mm spacer fits back there no problem on the PP wheels. Thinner than 23 and you need to cut lugs to get to the spacer size (ie. 23 - 20 = 3 to trim).

Sponsored