Will pp springs fit base model shock/strut

[Remy_reign]

I have been looking over the site and could not find the answer.

i hear things like not to by them due to the aftermarket springs being better and so on. my thing is im just not one that likes the drop to be that low, i love the drop amount on the pp springs though.

so im pretty much looking to see if the pp springs will fit the gt base shock/strut.

Thanks in advance.

Sponsored

 

[dwaleke]

Yes

 

[Todd15Fastback]

I have a set of the GTPP for sale with only 3100 miles on them. $55 shipped

 

[thewoodscrew]

What are the differences between the GT PP springs and base springs? I understand the spring rates are increased, but is there any changes in ride height?

 

[Todd15Fastback]

What are the differences between the GT PP springs and base springs? I understand the spring rates are increased, but is there any changes in ride height?

I think the PP springs have a small drop vs non-PP springs.

 

[thewoodscrew]

I'm only looking for like 1/2" of drop from my base GT, I'm interested in your GT PP springs if it will give me the drop I'm looking for.

 

[Chameleon]

I'm only looking for like 1/2" of drop from my base GT, I'm interested in your GT PP springs if it will give me the drop I'm looking for.

You won't notice it on the PP springs. You will want a bit more of a drop.

 

[Todd15Fastback]

I'm only looking for like 1/2" of drop from my base GT, I'm interested in your GT PP springs if it will give me the drop I'm looking for.

I see where car and driver mentioned in their review the GTPP had a little lower ride height vs base GT.

Trying to find more info.

 

[thewoodscrew]

You won't notice it on the PP springs. You will want a bit more of a drop.

I think you might be right, if I'm not mistaken, my 14 Focus ST was a bit lower than the Mustang and I really didn't scrape all that much.

 

[SC_Sport_Pilot]

I also have a set of PP springs and sway bars for sale.
Soon I will have a set of PP wheels for sale.

 

[Remy_reign]

I see where car and driver mentioned in their review the GTPP had a little lower ride height vs base GT.

Trying to find more info.

I too would. Like to know the drop of pp springs. I don't want My car Super low as its already low I'm just looking to be a little lower

 

[Ericc B]

my thing is im just not one that likes the drop to be that low

Cheers on that.

These cars in PP spec have a perfect ride height and I too really fail to see why people are lowering them. Makes no sense to me, I think it actually looks pretty silly.

But to each their own of course :cheers:

 

[Todd15Fastback]

I too would. Like to know the drop of pp springs. I don't want My car Super low as its already low I'm just looking to be a little lower

Do you have a flat/level garage floor to measure your center of the fender height? I think I still have my stock measurements before I put in my Steeda components.

 

[Remy_reign]

Do you have a flat/level garage floor to measure your center of the fender height? I think I still have my stock measurements before I put in my Steeda components.

I'm currently on the road for the weekend. If I get to a location with measuring tape I'll send them

 

[thewoodscrew]

I also have a set of PP springs and sway bars for sale.
Soon I will have a set of PP wheels for sale.

Damn, if we were closer I would be buying the whole lot off you.

Sponsored