SStock intercooler piping diameter

[SXS550]

Any one know the inside diameter of the stock intercooler couples for both hot and cold sides?
Thanks in advance.

Sponsored

 

[MAPerformance]

It's a mix of sizes. You have 2", 2.25", 2.5" and 3". 3" is on the cold side, hot side is gradually increased in size.

 

[SXS550]

Just curious what the ID of the couplers are at the stock intercooler location. Just the ends at the intercooler...

 

[MAPerformance]

Just curious what the ID of the couplers are at the stock intercooler location. Just the ends at the intercooler...

What are you looking to accomplish?

 

[SXS550]

I have a fairly large intercooler from another car I built and just looking to mock it up and see if I can get the intercooler piping to snake around the radiator and condenser and still wind up close to the stock intercooler coupler locations. It looks feasible...

 

[MAPerformance]

I have a fairly large intercooler from another car I built and just looking to mock it up and see if I can get the intercooler piping to snake around the radiator and condenser and still wind up close to the stock intercooler coupler locations. It looks feasible...

2.5" at the stock intercooler. So if you have to extend you will be looking at using 2.5" pipe and couplers.

If you need pipe, clamps, or couplers check out www.squirrelly.com

 

[SXS550]

Thanks!

Sponsored