croyde
Well-Known Member
- Joined
- Feb 21, 2015
- Threads
- 70
- Messages
- 1,211
- Reaction score
- 199
- Location
- SW London.
- Vehicle(s)
- BMW E36 323
- Thread starter
- #1
I have just given my CO V8 a good and careful wash and have found two chips on the paintwork.
One is almost in the middle of the bonnet, about 2mm round, down to the primer and the other is on the drivers door edge near the handle. I suspect I may have done that one in the dark pulling up to parking gate where you have to get out to speak to security via a speaker phone as it's set at lorry height.
I didn't see the low crash bar when I opened my door.
Any of you using and have sourced a CO scratch filler pen?
All ideas considered as obviously I need to do it for anti corrosion reasons.
Cheers.
One is almost in the middle of the bonnet, about 2mm round, down to the primer and the other is on the drivers door edge near the handle. I suspect I may have done that one in the dark pulling up to parking gate where you have to get out to speak to security via a speaker phone as it's set at lorry height.
I didn't see the low crash bar when I opened my door.
Any of you using and have sourced a CO scratch filler pen?
All ideas considered as obviously I need to do it for anti corrosion reasons.
Cheers.
Sponsored