Shift lights

[Iceman2733]

I have tried searching and can't find any information on this which I thought was weird. Does anyone know of any shift lights for these cars? I would love to put one on this car. I can't seem to stay off the stock rev limiter [emoji21] if anyone has any info on one let me know prefer to not splice into my harness

Sponsored

 

[fionic]

I have tried searching and can't find any information on this which I thought was weird. Does anyone know of any shift lights for these cars? I would love to put one on this car. I can't seem to stay off the stock rev limiter [emoji21] if anyone has any info on one let me know prefer to not splice into my harness

Dash turns red. max performance.

 

[Sasuketr]

Dash turns red. max performance.

True, but only on premium!

 

[Rv-Junke]

RAPTOR shift lights...

http://www.raptorperformance.com/

I spoke to them and they will work with the 2015...

 

[Iceman2733]

True, but only on premium!

That is good info a few people said it should turn red but mine never has. I guess that is why mine is a base model thanks for the info man

 

[Iceman2733]

RAPTOR shift lights...

http://www.raptorperformance.com/

I spoke to them and they will work with the 2015...

Thanks big time had forgot about Raptor. Looks like I am gonna have to splice into the harness. I might wait for someone to release a little more info on how to take apart the dash to even get to the wires lol

 

[croyde]

I don't need a shift light but I want one of those. Are they easy to wire in?

 

[Rv-Junke]

Thanks big time had forgot about Raptor. Looks like I am gonna have to splice into the harness. I might wait for someone to release a little more info on how to take apart the dash to even get to the wires lol

Here is the email I got from Raptor:

Hi Fred,
Sorry we’re just now getting back to you. Our shift light will work with the 2015 as well. We just don’t have a wiring diagram as of yet. It connects in the same manner.
The green wire gets it’s rpm signal from one of the eight coils. All ignition coils have a common color which is not the wire you want. You will want the non-common color on one ignition coil. The green wire of the shift light goes there.
Then just add ground to the black wire and switched power to the red wire. Make sure to set the shift light to ½ Pulse/Rev. That’s about all there is to it.

Thanks,

Rick Byrum
Raptor Performance
349-L Copperfield Blvd NE
#226
Concord, NC 28025
980-622-1628 (Ph)
980-939-6291 (Fax)

 

[mmorningstar]

Good info, going to try this on my Ecoboost.


-Matt
2015 EBM PP.

Sponsored