MPSS 335/30/20

[Need4SpeedMotors]

thats a serious poke.

Nice you got the forgestar wheels from the looks of it right?

Sponsored

 

[executiV]

Yes the model is F14.

 

[D3adch1ld]

I fitted the 335/30zr20 on 20x11 +48et, the tires get pull in to much on the 11" rim, need 11.5 and they poked out 1/2". That's also because I have my rear camber set at -1.4°. There was almost 3/4" in Board. With an 11.5 the tire would expand too much. 325/30zr20 will work fine on the 20x11 with the right offset.

 

[D3adch1ld]

Yes the model is F14.

I think i saw those for sale in another forum. Are this for sale still? Or perhaps maybe fit those in my car? Let me know Please.

 

[Todd15Fastback]

I fitted the 335/30zr20 on 20x11 +48et, the tires get pull in to much on the 11" rim, need 11.5 and they poked out 1/2". That's also because I have my rear camber set at -1.4°. There was almost 3/4" in Board. With an 11.5 the tire would expand too much. 325/30zr20 will work fine on the 20x11 with the right offset.

I have 20x11 +45 for my offset.


I am running -2.1 camber out back. You thing a 325/30/20 would work with that offset and camber?

 

[Need4SpeedMotors]

I have 20x11 +45 for my offset.


I am running -2.1 camber out back. You thing a 325/30/20 would work with that offset and camber?

Todd

So his is 3 mm less aggressive but he also is running less camber I think your good.

 

[Todd15Fastback]

Todd

So his is 3 mm less aggressive but he also is running less camber I think your good.

Thanks, Paul. As always, you rock.

Sponsored