MAF Sensor Screw - Part Number?

[MSMStannyl]

Anyone know the part number for one of the two MAF screws? I finally installed a Lund tune on my car yesterday which allowed me to remove the restrictor from my Steeda CAI. To remove the restrictor, I had to pull the MAF out. As luck would have it, the bottom screw fell down into the depths of the engine bay (pretty sure this leads to the same place as single socks in the laundry room). Needless to say, I'm currently running on 1 screw. Would like to get this straightened out...

P.S. - I was able to find some info on older models but not sure if it's the same (M4 x 1.25, 15mm long??). If that is correct, anyone know where that can be purchased?

Thanks for the help!

Sponsored

 

[NoVaGT]

Yeah, you gotta be careful.

I took a towel and spread it below the MAFS for just this reason.

 

[MSMStannyl]

Yep. I do have one of those magnetic wands to pull up stuff like this but I simply could not find it. I'm going on vacation tomorrow for several days so I'd like to order one in the meantime. I wasn't sure if this was something I could find at a parts store or Home Depot...

 

[NoVaGT]

Yep. I do have one of those magnetic wands to pull up stuff like this but I simply could not find it. I'm going on vacation tomorrow for several days so I'd like to order one in the meantime. I wasn't sure if this was something I could find at a parts store or Home Depot...

Find a real hardware store. One that specializes in screws/bolts/nutz of all shapes and sizes. They should have what you need.

 

[ForYourOwnGood]

Sent you a PM.

 

[s550_GT]

ahaha funny i just did this exact same thing today except i have the roush CAI. so i remove the MAF so i can remove the insert to allow for the 105mm. as im putting it back in i drop on of the MAF screws but lucky i caught it in time. sorry to here you weren't so lucky. hope you get it soon.

 

[blown302]

m14x12mm ford part no.W711655S300

 

[Kahboom]

Specialty drawers at Home Depot and Lowe's. I got some extra at Lowe's a few months back.

 

[MSMStannyl]

Sent you a PM.

Crisis averted! Just wanted to publicly thank [MENTION=25032]ForYourOwnGood[/MENTION]. He's helping me out by sending me a spare MAF screw (or two). This is what this forum and community are about. Thanks!

Also, thanks for the other info and responses! Hopefully it will help the next idiot who drops and loses his or her MAF screw...:cheers:

Sponsored