Front license plate

[TheDoctor66]

I am picking up a 2016 Gt pp 401a in deep impact blue tomorrow. however they already drilled the factory front plate. :( how big are the holes and what options do i have? it is a dealer trade so i couldnt say no drill. still excited for it but the front plate doesnt look great.

Sponsored

 

[kinchy]

I just went through that drill. Their doesn't appear to be a plausible solution at a reasonable price point and sooner or later I'm going to be staring up at a cop. I installed the black one that came with the car. You need to use rivets. I'm slowly getting use to the change.

 

[olla]

http://www.bumperplugs.com/index.php?route=product/product&path=1_11_78&product_id=78

 

[SK GT]

Just my advice...but I would search for another car. Plenty of 2016s out there like you want. The first dealer trade they found they assured me the plate was not drilled. I told them up front if it is I do not want it. I googled the vin and found pictures and sure enough it was drilled. They found me another one shortly after.

I would not settle and I live in a front plate state.

 

[Rascalrider]

I made sure the guys at the dealer knew not to drill mine! Went with the Sto N Sho bracket from LMR.

 

[olla]

I made sure the guys at the dealer knew not to drill mine! Went with the Sto N Sho bracket from LMR.

I guess the OP is too late for that :doh: I would say just buy some plugs like the ones I posted on the link. It's really not the end of the world. Some people have done it and they look perfectly fine and the paint matches the car perfectly.

 

[Kudarat]

this might help: http://www.m3post.com/forums/showthread.php?t=584852 ;)

 

[jasonstang]

I guess the OP is too late for that :doh: I would say just buy some plugs like the ones I posted on the link. It's really not the end of the world. Some people have done it and they look perfectly fine and the paint matches the car perfectly.

Worse case put strips on.

Sponsored