DUNDEM
Well-Known Member
Hi all. Just installed koni yellows and eibach pro kit.
Pulled out of the garage and notice clunk in the rear over bumps.
Issue was me. I didn't torque down the two bolts holding the shock at the bottom beneath the arm. There're 15mm bolts. Tighten them and noise is gone.
Stiffness Settings are 1 turn in the front. 3/4 in the rear.
Pulled out of the garage and notice clunk in the rear over bumps.
Issue was me. I didn't torque down the two bolts holding the shock at the bottom beneath the arm. There're 15mm bolts. Tighten them and noise is gone.
Stiffness Settings are 1 turn in the front. 3/4 in the rear.
Sponsored
