"Ford" part numbers for Level 2 Performance Pack "Wheels"

[Silver Bullitt]

What is the offset on the pp2wheels and will they work on pp1 without spacers? How abou the gt350 wheels?

19x10.5 +24
19x11 +48

I have read there are fitment issues with non PP2 cars. The PP2 cars have different front fender well liners.

Sponsored

 

[foxcoupefan]

19x10.5 +24
19x11 +48

I have read there are fitment issues with non PP2 cars. The PP2 cars have different front fender well liners.

PP2 Cars use the GT350 hubs which was a parts bin piece stolen from the Lincoln MKs limos. Just learned that. Which helps the wheel clear the strut. However, it should be a close fit on a standard GT. I will have to look in to it and try and get back to you.

I do love my PP2 wheels. For some reason the aftermarket reps just don't look the same to me. No matter what angle. Even my father said the same thing. I love them now, but I change cars and wheels like underpants, so mine may come up for sale. hahaha.

 

[blown302]

https://www.hubcaphaven.com/p/24777/aly10166-ford-mustang-wheel-dark-hyper-jr3z-1007-l.html
https://www.hubcaphaven.com/p/24776/aly10165-ford-mustang-wheel-dark-hyper-jr3z-1007-k.html
https://midwestwheelandtire.com/pro...007k-jr3c1007lb-jr3clb-10165h-alloy-wheel-rim

thanks good info

 

[milo4753]

I had the PP1 nickel wheels and have taken them off to run a square set-up with all season tires so I can rotate them.I replaced the Michelins with high performance all season tires that are rated for 50,000 miles. I got the Shelby CS-3 forged wheels 9.5's and went with 275X35X20 tires. I still have the stock PP1's with summer tires if I want put them back on. The CS-3's look a

lot like the PP2 wheels, come in three colors,can be staggered, and about a third the price of the PP-2's.

 

[RLMJR58]

I had the PP1 nickel wheels and have taken them off to run a square set-up with all season tires so I can rotate them.I replaced the Michelins with high performance all season tires that are rated for 50,000 miles. I got the Shelby CS-3 forged wheels 9.5's and went with 275X35X20 tires. I still have the stock PP1's with summer tires if I want put them back on. The CS-3's look a

lot like the PP2 wheels, come in three colors,can be staggered, and about a third the price of the PP-2's.

Offset? Spacers?
Looks very good!

 

[RLMJR58]

I had the PP1 nickel wheels and have taken them off to run a square set-up with all season tires so I can rotate them.I replaced the Michelins with high performance all season tires that are rated for 50,000 miles. I got the Shelby CS-3 forged wheels 9.5's and went with 275X35X20 tires. I still have the stock PP1's with summer tires if I want put them back on. The CS-3's look a

lot like the PP2 wheels, come in three colors,can be staggered, and about a third the price of the PP-2's.

Offset? Spacers?
Looks very good!

 

[milo4753]

I'm not sure about the offset, no spacers needed. There is no clearance issue with 275X35X20's. There are 20X11's available for the rear if you want to stagger them.

 

[RLMJR58]

I'm not sure about the offset, no spacers needed. There is no clearance issue with 275X35X20's. There are 20X11's available for the rear if you want to stagger them.

I have been looking at those for a while. Your set up look great. What tire did you go with?

 

[zero_chance]

What is the offset on the pp2wheels and will they work on pp1 without spacers? How abou the gt350 wheels?

I have the PP2 replicas in black on my car as of this weekend. Look awesome, fit awesome.

 

[RLMJR58]

I have the PP2 replicas in black on my car as of this weekend. Look awesome, fit awesome.

No fitment issues (especially with the upsize in tires)? One suggested that front fender well inserts are different on PP2.

 

[dman]

Aftermarket will eventually make copies.

they already do, sorta...check LMR. by the way, if the oem's are anything like the PP1 wheels...they probably weigh a ton. maybe not? depends what you want. performance (un-sprung weight) or looks... dman

Sponsored