markmurfie
Well-Known Member
- Thread starter
- #1
I've had the car for three months now and 9/6/15 was the first time I was able to go down the track. I knew the launch was going to be tough from practicing on the street. all three passes I lifted off around the 60ft because of very bad wheel spin and wheel hop. 1st pass 14.6, 2nd pass 13.6, and third pass 13.3.
I have the Nero A/S 235/50/18's with 25psi in the rear and 38 psi in the front. read some where on here that would help with traction. I'm sure if i could have got another couple passes i could have gotten in the 12's. DA for the day was 2500. BMR cb005 is on the way. ngauge/jlt should be on its way shortly. next mod will be some better tires. two weeks until the next races and then the track will close for the rest of the year (probably longer) to be resurfaced.
I have the Nero A/S 235/50/18's with 25psi in the rear and 38 psi in the front. read some where on here that would help with traction. I'm sure if i could have got another couple passes i could have gotten in the 12's. DA for the day was 2500. BMR cb005 is on the way. ngauge/jlt should be on its way shortly. next mod will be some better tires. two weeks until the next races and then the track will close for the rest of the year (probably longer) to be resurfaced.
Sponsored
