syntheticgt
Well-Known Member
- Joined
- May 9, 2015
- Threads
- 9
- Messages
- 93
- Reaction score
- 18
- Location
- Houston/Katy
- Website
- www.automodia.com
- First Name
- Gabe
- Vehicle(s)
- 2015 OW EB 6mt w/PP and Recaros
- Thread starter
- #1
While test fitting the RPF1s this weekend I ran into an issue. The dust cap on the front hub hits the inside of the wheel hub preventing it from sitting flush on the rotor.
Any workarounds for this?
RPF1s have a 73.1mm bore and the Mustang is 70.5mm.
Any workarounds for this?
RPF1s have a 73.1mm bore and the Mustang is 70.5mm.
Sponsored