pilotgore
Well-Known Member
- Thread starter
- #1
Hello Everyone,
From now until midnight on Sunday Nov. 28'th, I'll either take $5 off your order total, or upgrade to priority shipping at no additional charge for any of the printed parts I 3D print. Unless I get a crazy amount of orders, most should ship on Monday this coming week. For those not aware, I make parts to help make oil changes as mess free as possible. I make a twist to lock oil funnel, thats strong enough to hold a 5 Quart jug, and will take oil as fast as you can pour it in. I also make an oil filter guide for '17-'20 GT350's and all GT500's that slides over the oil filter housing, and directs the oil into the driver side wheel well (then into an oil drain pan) instead of onto the belly pan. You'll lose a few drops, and I do mean just a few drops when installed correctly which is SIGNIFICANTLY better than form-a-funnel or any other method out there. Finally, I make a replacement belly pan trap door (which isn't available through ford unless you buy an entirely new belly pan.) Standard prices are as follows (including shipping, before discount):
Oil Funnel: $38.50
Belly Pan Trap Door: $40.00
Oil Funnel with dust Caps: $53.50
Oil Filter Guide: $53.50
Oil Filter Guide & Oil Filter Funnel: $78.50
Oil Filter Guide, Oil Funnel, Oil Funnel Dust Caps: $93.50
Due to the limited production nature of these products (and this being a hobby), I dont have a website setup for ordering. Instead, send me a PM if you'd like to place and order. Below are pictures of the products, a demo video for how to use the filter guide, forums posts that outline the evolution/sale of the products, as well as some reviews sprinkled in. If you have any questions, don't hesitate to ask! Thanks for looking!
GT500 adaptation: https://www.mustang6g.com/forums/th...y-non-exxon-valdez-style.165316/#post-3362990
Original Build Thread: https://www.mustang6g.com/forums/threads/3d-printed-oil-change-apparatus-oil-filter-funnel.162885/
Oil Filter Guide in operation (This was the version 1. The version 2, which is shipping now, has some improvements but the use is generally the same.)
Oil funnel in operation (this was early on in development when I was making a pressure fit and twist to lock version of the funnel.) After dialing everything in, I decided twist-to-lock was superior and so thats all I sell now
From now until midnight on Sunday Nov. 28'th, I'll either take $5 off your order total, or upgrade to priority shipping at no additional charge for any of the printed parts I 3D print. Unless I get a crazy amount of orders, most should ship on Monday this coming week. For those not aware, I make parts to help make oil changes as mess free as possible. I make a twist to lock oil funnel, thats strong enough to hold a 5 Quart jug, and will take oil as fast as you can pour it in. I also make an oil filter guide for '17-'20 GT350's and all GT500's that slides over the oil filter housing, and directs the oil into the driver side wheel well (then into an oil drain pan) instead of onto the belly pan. You'll lose a few drops, and I do mean just a few drops when installed correctly which is SIGNIFICANTLY better than form-a-funnel or any other method out there. Finally, I make a replacement belly pan trap door (which isn't available through ford unless you buy an entirely new belly pan.) Standard prices are as follows (including shipping, before discount):
Oil Funnel: $38.50
Belly Pan Trap Door: $40.00
Oil Funnel with dust Caps: $53.50
Oil Filter Guide: $53.50
Oil Filter Guide & Oil Filter Funnel: $78.50
Oil Filter Guide, Oil Funnel, Oil Funnel Dust Caps: $93.50
Due to the limited production nature of these products (and this being a hobby), I dont have a website setup for ordering. Instead, send me a PM if you'd like to place and order. Below are pictures of the products, a demo video for how to use the filter guide, forums posts that outline the evolution/sale of the products, as well as some reviews sprinkled in. If you have any questions, don't hesitate to ask! Thanks for looking!
GT500 adaptation: https://www.mustang6g.com/forums/th...y-non-exxon-valdez-style.165316/#post-3362990
Original Build Thread: https://www.mustang6g.com/forums/threads/3d-printed-oil-change-apparatus-oil-filter-funnel.162885/
Oil Filter Guide in operation (This was the version 1. The version 2, which is shipping now, has some improvements but the use is generally the same.)
Oil funnel in operation (this was early on in development when I was making a pressure fit and twist to lock version of the funnel.) After dialing everything in, I decided twist-to-lock was superior and so thats all I sell now
Sponsored
