Anyone using an OMP WRC-R XL seat for DE/autocross?

strengthrehab

Well-Known Member

Jun 26, 2020

Thread starter
#1

I'm considering this seat. It gets great reviews and based on dimensions it should fit, just wondering if anyone ran into any problems with one. My current seat is not the most comfortable after an hour.

Sponsored

SOLD:
HPDE "track rat" and CAM-C autocross 2016 DIB Base GT with PP bought on 2/10/16.
Drivetrain Mods: 2018 IM (unported), Boundary OPG, GT350 "CAI", Lund Racing tune, UPR catch can, Texas Speed long tube headers, MBRP stainless Street exhaust, Borla 3" resonator muffler, MGW Race Spec, Exedy Hyper Single Clutch. 3.31 Aluminum center section with Torsen swap.
Wheels/Tires: 18x11 Flow One F2 wheels with 315/30/18 Nankang CR-S tires. 19x11 GT7 Wheels with 305/30/19 RE71R tires (street/track?)
Suspension: MCS TT2 Coilovers with 450F and 750R spring rates; Vorshlag Camber/Caster plates and rear shock mounts; Pedders adjustable front and rear sway bars; BMR cradle lock out and lower control arm bearings. Steeda Roll correction lateral links and tension links with spherical bearings, J&M bumpsteer kit
Safety: Schroth Quick-Fit harness (Driver side)