dannyn502
New Member
- Joined
- Jul 6, 2022
- Threads
- 1
- Messages
- 1
- Reaction score
- 0
- Location
- Califronia
- First Name
- Dan
- Vehicle(s)
- 2016 ford f350
- Thread starter
- #1
Hey Guys,
I tried searching for this information but I had no luck. I was wondering if any of you Airlift pros can help me out. I came up on a 3P manifold and with a connector but no wires. I want to DIY my own 3P harness (no height Sensor). Can any one send me a Pin layout of your 3p Harness? A picture of the back of the harness would work. If you can also let me know which wire is which. If not a picture of the back of the connector would be suffice.
Thanks in advance.
I tried searching for this information but I had no luck. I was wondering if any of you Airlift pros can help me out. I came up on a 3P manifold and with a connector but no wires. I want to DIY my own 3P harness (no height Sensor). Can any one send me a Pin layout of your 3p Harness? A picture of the back of the harness would work. If you can also let me know which wire is which. If not a picture of the back of the connector would be suffice.
Thanks in advance.
Sponsored