Aeroforce Interceptor gauge install

[Eco_roller]

Those are the mounting screws, they are not touching the dash. I have the steering wheel pulled out all the way (towards me)

Sponsored

 

[Choking_Victim]

Those are the mounting screws, they are not touching the dash. I have the steering wheel pulled out all the way (towards me)

Right on man, I too order the blue. Looking forward to seeing your in action.

 

[Eco_roller]

Video posted

 

[Chameleon]

Cool. Says it is private

 

[Choking_Victim]

+1

 

[Eco_roller]

Cool. Says it is private

Fixed

 

[Eco_roller]

A few things I have noticed. The MPH reading is off by 2, the boost readings are incorrect, and sometimes it takes longer for the gauge to power on. They are working on the power on issue and will reflash my gauge when they get it sorted out.

 

[Choking_Victim]

A few things I have noticed. The MPH reading is off by 2, the boost readings are incorrect, and sometimes it takes longer for the gauge to power on. They are working on the power on issue and will reflash my gauge when they get it sorted out.

Is this going to require you to send it to aeroforce? How have you confirmed the discrepancy ?

 

[Eco_roller]

Yes, i received an email stating they are working on the power up issue and will have to reflash my gauge. For the boost reading issue, they say that it is a known issue with the map sensor reporting incorrect boost. I asked if they can get the gauge to convert the signal to report the correct reading.

 

[Choking_Victim]

Hmm I see, I have a N/A car so the boost issue isn't a worry, however sucks to know I'll need to send it in as soon as I receive it. I'm assuming the one I ordered yesterday is on the same firmware your's is. Could you confirm your firmware number? Perhaps the vendor can confirm this info?

 

[Eco_roller]

I have to check the firmware. It seems as if this gauge isn't ready for our cars yet.

 

[Choking_Victim]

I have to check the firmware. It seems as if this gauge isn't ready for our cars yet.

is it the CNF series gauge? part #? hoping you were sent the correct one for the eco boost/2011+ cars

 

[Eco_roller]

Yes, it is

 

[Eco_roller]

Posted update (speedo related)

 

[Choking_Victim]

Saw your threads @ aeroforce. I have yet to get my gauge, but am curious what firmware version your on? I see that they charge $25 for a reflash. Is this something you'll have to pay in order to get the aforementioned revisions?

Sponsored