5.0yote
AKA Bananana & 3.7Cyclone
- Joined
- Jul 18, 2015
- Threads
- 29
- Messages
- 619
- Reaction score
- 148
- Location
- Mansfield, MA
- Website
- www.youtube.com
- First Name
- Don
- Vehicle(s)
- 2016 Mustang Ecoboost Premium
- Vehicle Showcase
- 1
- Thread starter
- #1
I have a 2018 Intake manifold from a GT I had installed a supercharger on for a dude, he abandoned the intake at my house and left me holding the bag on supplies purchased to do his install which was labor free. So I'm selling it since he has ghosted me since Jun 1st =)
The car had around 28K on it, intake is in great shape, no damage, cracks etc. It has stock injectors and fuel rails still on it, as well as the vacuum setup for the flappers still in place. You can buy billet lockouts and remove all that and lock the plates open. All that is needed is your existing fuel pressure sensor on the rails and new o-rings (we reused the stock ones in the Edelbrock manifold.) Its a good upgrade to boost your HP tuned on a gen 1 or gen 2 coyote.
$270 shipped.
The car had around 28K on it, intake is in great shape, no damage, cracks etc. It has stock injectors and fuel rails still on it, as well as the vacuum setup for the flappers still in place. You can buy billet lockouts and remove all that and lock the plates open. All that is needed is your existing fuel pressure sensor on the rails and new o-rings (we reused the stock ones in the Edelbrock manifold.) Its a good upgrade to boost your HP tuned on a gen 1 or gen 2 coyote.
$270 shipped.
Sponsored
Last edited: