2015 GT - 9.90 at 147mph 1/4 and 205 one mile - Boost Works Twin Turbo

[FATHERFORD]

Rest of the turbo system came back from being jigged yesterday morning...

And there are rumors my car is getting a sleeved block and circle d trans setup so I can max out my 62mm...See if we can make 1100+rwhp ;-)

Sponsored

 

[theereverand]

Cool, whose doing the motor?


Sent from my iPhone using Tapatalk

 

[FATHERFORD]

Cool, whose doing the motor?


Sent from my iPhone using Tapatalk

The motor is already built by HPP Racing...

This was the owners of HPP(manny) engine he had built for his TT 2015... I'm buying his already built motor and his trans. He is slapping those in my 15' and i should be driving this on the hotrod power tour.

 

[Poisond281]

Badass! Manny always does top flight work!

 

[FATHERFORD]

Well... In three weeks I will have her back with the following...

Built Sleeved Coyote Short Block
Billet oil pump gears
Fluids for motor build
Gasket Kit- Head Gaskets, Oil Pan, Front and Rear Main Seals, Front Cover, etc...
Spark Plugs-Brisk RR10S
ARP Head Studs-Coyote
Freon R134
Circle D Built Transmission
Circle D Converter
Transmission Fluid
Custom 62mm Turbo kit for 2015 Mustang GT(installed)
Additional BOV
Magnaflow 5.0L Street Series Cat-Back
170 Thermostat-Coyote
HPP Fuel System-(CP-E Triple Billet fuel hat, 3 Warbro 465lph
Fuel Pumps, 10 Micron Fuel Filter, -8 Startlite feed line, Y block,
-10 FP reg., -6 Startlite return line, all necessary Startlite Fittings,
Hose Ends, wiring supplies, etc...)
Fuel Rails CP-E Coyote
Injectors-ID1300
XCAL4
E85 Dyno Tune
93 Dyno Tune
DSS Driveshaft-carbon fiber
DSS 1400hp Half Shafts

 

[MrWolf]

I got to admit this car all sounds of win.

I posted this question in another section of the forum, but based on what you javelin done to yours, important hopping you can give some pointers

Waiting for the 2015 to be released here (UK) and when I get mine, I'm wanting to put on some proper meats out back.

What i want to know is what do I have to do to get some 18 x 12 inch rims with 345s to fit (thinking m&h tires 345 35/18). I'm shamelessly looking at copying this look on the car.



Any advice, pointers would be most appreciated.

(I understand I will be able to hook with smaller, but I just have to have the look).

Long term, Im looking at adding some form of power adder and leaning towards the TT.




Sent from my GT-I9000 using Tapatalk 2

 

[FATHERFORD]

we just widened factory wheels by 4" and made a bracket for the upper shock mount.

Those 345's would look real meety!

 

[Laztug]

What turbos did you go with?

 

[FATHERFORD]

What turbos did you go with?

Precision 6266 turbos... Think they are rated at 735hp a piece.

I'm probably going to be limited to just 1100rwhpish with the ID1300 injectors, but this car is going to be my daily. I wanted good running injectors on regular pump gas and e-85.

The ID2000's are great injectors, and yes we are still working on my 14's tune, but I keep hearing 1300's have no problem what so ever driving like stock. Since my wife will be driving this car also, I wanted her to just jump right in and go. I'll leave my 14 mustang as my "racecar"

 

[Laztug]

Precision 6266 turbos... Think they are rated at 735hp a piece.

I'm probably going to be limited to just 1100rwhpish with the ID1300 injectors, but this car is going to be my daily. I wanted good running injectors on regular pump gas and e-85.

The ID2000's are great injectors, and yes we are still working on my 14's tune, but I keep hearing 1300's have no problem what so ever driving like stock. Since my wife will be driving this car also, I wanted her to just jump right in and go. I'll leave my 14 mustang as my "racecar"

Awesome build!
When is this kit is going to be sold to the public?


I am having a FP htz 3586 installed in my sti. Can't wait to start hurting some feelings.

 

[MrWolf]

we just widened factory wheels by 4" and made a bracket for the upper shock mount.

Those 345's would look real meety!

Will you guys be getting these brackets out there for sale for the general public?
Will fitting these brackets have much of an affect on handling?

Getting serious wheels and tire combo will be my first mod (once I get the car that is).

Sent from my GT-I9000 using Tapatalk 2

 

[FATHERFORD]

Will you guys be getting these brackets out there for sale for the general public?
Will fitting these brackets have much of an affect on handling?

Getting serious wheels and tire combo will be my first mod (once I get the car that is).

Sent from my GT-I9000 using Tapatalk 2

Pretty sure you can call HPP right now and Chris can fab you up some.

 

[MrWolf]

Thanks for reply and info. Will do this hopefully sooner rather then later.

Sent from my GT-I9000 using Tapatalk 2

 

[FATHERFORD]

Coolant tank just got back...

 

[FATHERFORD]

Awesome build!
When is this kit is going to be sold to the public?


I am having a FP htz 3586 installed in my sti. Can't wait to start hurting some feelings.

You can pre-order right now. It's honestly a hell of deal compared to other twin kits out there... High quality stainless, comes with custom headers(doesn't use stock manifolds), has custom water tank instead of reusing the factory ugly one, etc.

Sponsored