Search results

Was told by the Rob to throw it in there to hold more boost it’s on my torque booster side. For your other response I thought about going higher in ratio but I know it would eat through first fast I could no lift shift it into 2nd pretty quick so could help. I agree with your tire response I...

Thanks for the response I’m more concerned with track time vs daily driving. I run a 28 after switching from Mickey Thompson ET streets they were a 305/40R18 I had traction issues but they were a radial vs a slick. Wasn’t many options at the time for a slick having 18in wheels so I decided on...

Hey Guys, I have a 2015 Mustang Gt with the 6m MT82 Trans So I have been driving this car Mainly for Drag Racing, I occasionally do some local cruising with minimal hwy but some roll racing as well. I have been fighting Launches at the track car seems to bog fall flat then pick up so 60ft has...

Pictures would be appreciated man!!

Hey guys looking for some help, I have a 2015 Mustang gt with the Paxton kit I was running the UPR dual valve catch can kit but wanted to get rid of the jlt intake and just run a screen at the track and a cone on the street. Problem is the kit states only works with an intake. So, I am having...

Just an update. Replaced the crankshaft position sensor as stated. Seems to have actually finally helped the idle a ton!! I will be installing my fuel system and retuning with e85 to iron everything out. Have a slight slight surge but I’m sure when tuned with the issue it had to compensate for...

Replaced to the alternate TB after issue started in attempts to correct issue I suspected at first that was the case but in the end seemed not to be. Also pondered a BOV issue :/ defiantly been a real pain chasing it so many probable causes on these cars it seems, and I’ve got it to idle...

Have really hoped this wouldn’t be the case but will of course have to check and hope for the best, I guess worst case it’s a good excuse to tell the wife for going built. Will update once performed

Thank you for the response I’ll definitely give that a try cheap enough part to replace and hope for a good turn out ! Will update when done parts look to be a bit out.

Well replaced it still has slight idle fluctuations starting to wonder if a retune is necessary or possible stock fuel pump issue?

I have a new in box manifold I may just try and swap out and see was wondering if I did the ol carb cleaner trick to see if I spray around it idle changes

I’ll try and take a look anyway to simply test that or is it just remove and inspect more or less?

just trying to see if anyone with a similar common setup has had similar issues looking for insight. That’s the purpose of forums a community of people with similar cars, mods, problems etc to help one another. Do I expect to get a fix or a proper diagnostic? No but if I gain some more knowledge...

Hello all, I’ve been fighting an issue with my stang for over a year and after countless hours and searching I can’t seem to find a solid solution to my problem. Car: 2015 mustang GT Mod list: Paxton 2200sl 3.33 pulley 2018 intake manifold (locked out) Id1050x injectors Long tube headers...