Search results

I swapped to Sync 3 from the smaller base radio and upon putting it in, I converted the VIN on the APIM to my actual VIN via Forscan (I did use it just fine without switching the VIN at first). As for the official updates, Im pretty sure you'll only provide the donor car's VIN for it to link...

If you havent already pulled the trigger on one, I personally went with this one priced at $249 https://hellhorseperformance.com/collections/digital-coversion-kits/products/4-to-8-plug-n-play-conversion-harness-for-sync3-15-18-mustang. It works perfect. I saw a bunch of conversion harnesses on...

Probably not a lot of folks in my boat but for the Drive mode enable code, for an ECOBOOST PP 760-02-02 : xxxx 4xxx this not only enables the drive modes, but retains the double tap on the traction control to enable sport mode. (I suppose that works on the base model too).

Ive been searching high and low for an answer to what I believe to be a unique issue, possibly needing some Forscan values tweaked which I am not the most proficient in. I have a 2018 Base Ecoboost with Performance Package, I installed the Sync 3 via sourced parts and used the drop down boxes...

It very well could be the ABS module itself, or a wheel speed sensor. In my case, it was both. It seems scary with all those lights coming on and losing all of the safety nannies, but the car will still drive fine. I would try your best to have someone scan for trouble codes while the dash...

Hey all, I have had my Sync 3 swap done for a little over a year now with no issues. I used Forscan to enable drive modes and whatnot and all was good. Recently, my car had to have the ABS module and a wheel speed sensor replaced which is now causing my drive mode selection to only partially...

The title pretty much says it all, but I will explain this as efficiently as I can. Car is a 2018 base ecoboost with performance package. It has a stage 1 cobb tune, nothing serious there, but my Sync 3 setup was swapped in using hellhorse parts and all was previously working fine for over a...

If you want to enable the light in the gauge cluster that indicates when the fog lights are on/off, you will need a PC with a program called Forscan and an OBDII/USB cable. I recommend checking out Forscan guides before trying that but it’s pretty easy if you’re savvy with computers and stuff...

I can’t say with 100% certainty on the 2019-2021, however, my 18 is almost as base as you get, just with a performance pack and it truly was plug and play. The fog light has an extra pin that the non-fog one simply skips. The connecting harness in the vehicle is the same for both and I don’t...

I've recently purchased a Recaro Bezel to begin my 4" to 8" sync 3 conversion, I'm a little unsure of exactly what I need but have a rough idea. I have a 2018 Ecoboost PP and I am looking for the following: - Sync 3 APIM and Screen (with mustang brackets) - Conversion harness 4" to 8" (Hextall...

I have a friend in Jacksonville who is highly interested in these, he has just registered on mustang6g and is still awaiting approval, I can PM you his contact info if these are still available.

That’s literally it. To enable to the dash light it’s fairly easy as well, just requiring a setting flipped in Forscan. Took me all of 2 minutes to enable.

Any additional parts needed to swap this into a base 2018?

So as far as choosing which tune to install if I go canned, I simply would choose one for my 2018? Or does the fact that it’s a model refresh not matter in terms of the tuner? I’m sure if I had one in hand to play with and see for myself these would be stupid questions, I just don’t want to...

Im new to the world of tuning but I understand a little bit of it, and the actual tune install seems very straight forward. I know the 2018+ model is different than the 15-17, but is the Cobb Accessport any different? If I purchased a used one unmarried that was originally from a 15-17, would...

I have a 2018 base Ecoboost PP that did not come with remote start and I see various plug and play kits for 2015-2017 models that several sellers have confirmed to me that they simply do not make one for the 18+ yet. I stumbled across a Ford OEM kit: JS7Z19A361A, and it is described as a...

I have a spare bumper with turn signals in it and its making a pretty cool display piece. I had an idea to somehow wire up the lights to function while plugged into a wall outlet, but have no idea where to find either a connector to start with, or a harness. I've checked on the ford parts site...

I just wanted to provide an update. I finally went ahead and ordered a proper ELM cable capable of accessing MS/HS via a switch and completed this swap. Within Forscan, it was as simple as enabling foglights under the IPC module to get the cluster indicator on. Aside from that, the switch was...

I got a deal on a bumper from a GT that included everything from the grilles to the fog light turn signals which don’t come on base model Ecoboosts. I have purchased a new headlight switch that also operates the fogs (Part #: SW6985, the one without the level adjustment). To my understanding...

I did some searching but was unable to find what I was looking for. Can anyone confirm if ForScan would work with an 18 EcoBoost base model to enable remote start? Then I suppose an OEM fob with remote start buttons could make it fully functional? I’m seeing conflicting things online...