Search results

I do have a gauge but they wouldn’t let me in the car and they weren’t watching the gauge unfortunately so I can’t speak on psi. However, it is a very cheap gauge lol. I want to replace it with one that will save max boost numbers

Made 790whp on the dyno on a 95mm pulley, I know dyno's and cars vary but I'd think it should be a bit higher especially since it was 53 degrees F outside. 2019 G3X 95mm g4 intercooler. I'm not a mechanic by any means but I've managed through Youtube tutorials, but unfortunately there is nothing...

I bought a digital cluster but it doesn't have mycolor. My car is a 2019 premium PP2 and my analog dash had mycolor. I bought it programmed, did they forget to enable mycolor in the programming? Do I have to buy a obdlink to use forscan now and enable it myself? Will that wipe any of the current...

the wear at the top and bottom compared to the middle? Shouldn’t it be fairly similar throughout?

I’m assuming this isn’t normal? This is on the driver side rear, inner brake pad. 35k miles.

Ok np I have 555r2s now, but kinda worried I messed them up by letting the car sit in the garage over winter. Feels bumpy now, I’ll try a balance and running them for a bit to see if it goes back to normal.

I don’t know much about gauging tread on drag tires since they look bald to me new anyways. I’m 900whp so I need something decent I saw these posted locally, 2023 date code. These still have life? Figured I’d pick them up since they can be had for $300

I used the yellow grey one shown below. Am I just using the wrong name for it? Or you used something else for the remote wire? I tested it today and this wire is not giving me power for some reason.

I put in a fore L2 system, and I have two issues going on The car fired up, but died immediately after. I noticed the belt tried to jump off on my ESS, I put on a 95mm griptec so I will have to verify the offset to my 125mm that worked fine, likely just a pulley issue there. my other issue I’m...

I asked to tee off my boost gauge line from that and Lund said no.

I have the fore block. Is there like you’d recommend to tee off? I mean lund hasn’t reported any issues, I can hear it sometimes but this is how the instructions for the kit said to set it up?

Hi. I’m installing a fore triple pump fuel system and am nearly completed. However, on the port side I need a vacuum/boost reference and I do not understand this system at all. Lund told me “I would not use the BOV/Boost Gauge lines for your Fuel Pressure regulator. It needs its own standalone...

Some cool cars in here

Installing a triple pump 285 kit with a hobbs. This is what I have ascertained online: Seems like I need to; Wire all 3 pumps separately into pump 1, 2, and 3 red power wire goes to front battery, mount circuit breaker on battery cover and then run it to positive terminal or one of the fuse...

Never seen one of these before. Trying to access fuel lines, videos online just show torx and nuts not these.

Well I trimmed it a little as the bare wire was sticking out the end so length should have been good and yes I tried to crimp it twice I’m not finding a lot for heat shrink that is fuel compatible. McMaster sells one for diesel but some reports that the heat shrinks fail after a year in gas.

Well I used the ratcheting style on the red and the wire can still be pulled out and is definitely not sealed lol

https://ibb.co/qB8bZgh https://ibb.co/t29rf3C https://ibb.co/f1C82xY https://ibb.co/WzKY5vq https://ibb.co/nf4Xk0K https://ibb.co/ydgGX7p https://ibb.co/TY2Yb6h Going to be in my fuel tank so want to make sure I am getting the right connection. I think they are regular nylon butt splices

These look like crimp connections, do I need a special crimping tool or can I just close it with pliers? For Fore fuel system...

My car has active exhaust from the factory, but the actual active exhaust muffler/actuators were removed. So I need an exhaust and the two actuators, does anyone know the part numbers for the actuators? All I could find was JR3Z-6554-A but when googling this is showing me 2020-2021 and my car is...