Search results

I'm sure this has probably been answered before, but would my 1-7/8" catted ARH long tubes from my '15 fit on an '18? If not, what modifications need to be done?

Up for sale is a lethal xpipe, Ford racing touring axle back and stock pipe between the x and axle backs. This will give you a complete catback so theres no need to cut yours up if you dont want to. X pipe has about 2500 miles, mufflers have about 2000 miles on them. $650 obo, pick up preferred

I know it may vary a bit depending on if the VCT was changed and other factors, but what kind of lb/min are you seeing and what mods? I'm seeing about 42.5 lb/min at 6800ish in 3rd gear. Lund 93 tune with x pipe and FRPP axle back. Temp was about 65 F when the logs were taken. Will be doing a...

I have only had the lund 93 tune on my car for a few weeks. I have noticed that before the engine is up to temp, the car feels like it stumbles, almost like a slight misfire. Once the CHT gets up to 185 or 190, the issue goes away. I never go about 50% throttle before it is up to temp either...

I doubt many people have had both, but if you have heard both what are your impressions? Which one is deeper? Smoother tone? Louder? Drone doesn't bother me so I really don't care if it drones, I rarely drive on the highway anyways

So I am currently running a lethal x pipe with FRPP touring axle back. I am looking to add headers in the future, but want to keep it from getting too loud and raspy. From what I have read, the Borla 60561 resonator is a direct swap for the Ford Racing x-pipe that is used in the full FRPP...

So I've been through a few different exhaust setups. First was Roush axle back. Not bad, but wanted a hair louder. Roush axle back with x-pipe. A bit too harsh of a tone and too loud to daily drive, and if I wanted to add headers, it would be too much for me. Ford racing touring axle back...

I swear I found a post on here a while back that had videos of 2 different long tube headers with the same catback to show the difference in sound. I can't seem to find it now. I know the placement of the runners is different between some of the top tier offerings like ARH, Kooks and SW. In...

I'm willing to bet most of you haven't heard 2 of the same exhaust setups back to back with the only change being different size headers, but I figured I'll ask anyways. How much difference in pitch/volume is there between 1 3/4 and 1 7/8 headers with the same catback? Is the change even...

So I washed the car today for the first time in a while. I went to get something out of the trunk and noticed a ton of what look like spider cracks or scratches all over my spoiler. Has anyone else had this issue? I'd hope it would be covered under warranty, but I really don't trust leaving...

Like the title states, what would be my best bet for tires on stock axles? Right now, I'm only running a catback, 285/35/19 Nitto Invos out back, and BMR performance springs going on next week. I've thought about getting a separate rear setup just for occasional drag use. I've heard bias...

Like the title states, what would be my best bet for tires on stock axles? Right now, I'm only running a catback, 285/35/19 Nitto Invos out back, and BMR performance springs going on next week. I've thought about getting a separate rear setup just for occasional drag use. I've heard bias...

So I've had my RTR Tech 7 wheel package from AM on for about 2 weeks now. I originally did not order the TPMS tool because some people said their's learned on their own. So I figured I would give it a shot and if they ended up needing to be trained, I'll order the tool. Of course with my luck...

Who's running the BMR drag springs in the rear and the minimum drop springs in the front? I've only been able to find a few pics of this setup. I am only looking for a minor drop and to even out the reverse rake look the factory suspension has. This combo seems to be exactly what I'm looking...

Haven't seen them in person, the Roush extractors come unpainted in ABS plastic. Do they match the color of the side skirts and front splitter? It's hard to tell in pictures

I'm considering picking up some 20" dark stainless AMR in 8.5/10 with 255/35 and 305/35 mickey thompsons. Does anyone have any pics of this setup on their car? Preferably on DIB with stock suspension (will probably throw springs on eventually, but want an idea of how they'll look until then)

Does anyone know the offset of the base GT 18x8 wheels? I swore I found them once, now I can't

So I installed the X-pipe to go with my Roush AB this weekend, as I was not 100% satisfied with the Roush on its own. The tone seemed to flatten out up to me. Well now with the X-pipe, in higher RPM's it definitely screams. But cold starts are ridiculously loud and it just sounds too...

Doing my exhaust this weekend, I managed to strip out one of the bolts for the exhaust hanger that mounts to the subframe. Does anyone have the part number for that bolt and the floating washer for that hanger? I checked Ford parts website, but the diagrams won't expand for me so I'm not sure...

My lethal x-pipe arrived yesterday and I want to install it after work today. Has anyone installed them by just driving the rear of the car onto race ramps? I don't think it should be too bad and really don't wanna take it to a shop to pay them to put it on. I had no issues installing the...