Update, the front extensions are needed for sure with the rear being turned off with my tune. No way stock wiring harness could reach even after removing them from there mounting points.
The small crack by the mounting tab was allowing moisture in and that burnt out the drl board. I replaced the drl board with a used one and when I reseal the headlight I fixed the crack with the same sealant.
Yes it was a easy fix, found someone that was selling a driver side headlight for cheap, that was cracked but the drl board was still working. Opened the headlight and switched out the drl board and resealed the headlight. Don't rush trying on opening the headlight take your time, I used two...
I have the base 6 speakers and are the front doors 2ohm or 4ohms ? i checked the rear and they are 25W and 4ohm.. Only reason I'm changing is because the passenger door speaker is blown.
Hence my post, he asked that I send him pictures of the stock pressure plate so he can clearly see the bolt pattern. Problem is I was at TX2K in Houston, which is about five hours away from me and I left the Mustang at my brothers who lives in Houston after it broke down. I stayed till parts...
I brought this clutch kit from Rockauto for my 2015 Mustang GT 6 speed, and after trying to install it realized that only six pressure plate bolts and NO dowel pins would line up to the stock flywheel. I have been in communication with Gary Warren from M-Pact Clutches, the actual manufacturer of...