Search results

Made 790whp on the dyno on a 95mm pulley, I know dyno's and cars vary but I'd think it should be a bit higher especially since it was 53 degrees F outside. 2019 G3X 95mm g4 intercooler. I'm not a mechanic by any means but I've managed through Youtube tutorials, but unfortunately there is nothing...

I bought a digital cluster but it doesn't have mycolor. My car is a 2019 premium PP2 and my analog dash had mycolor. I bought it programmed, did they forget to enable mycolor in the programming? Do I have to buy a obdlink to use forscan now and enable it myself? Will that wipe any of the current...

I’m assuming this isn’t normal? This is on the driver side rear, inner brake pad. 35k miles.

I don’t know much about gauging tread on drag tires since they look bald to me new anyways. I’m 900whp so I need something decent I saw these posted locally, 2023 date code. These still have life? Figured I’d pick them up since they can be had for $300

I put in a fore L2 system, and I have two issues going on The car fired up, but died immediately after. I noticed the belt tried to jump off on my ESS, I put on a 95mm griptec so I will have to verify the offset to my 125mm that worked fine, likely just a pulley issue there. my other issue I’m...

Hi. I’m installing a fore triple pump fuel system and am nearly completed. However, on the port side I need a vacuum/boost reference and I do not understand this system at all. Lund told me “I would not use the BOV/Boost Gauge lines for your Fuel Pressure regulator. It needs its own standalone...

Installing a triple pump 285 kit with a hobbs. This is what I have ascertained online: Seems like I need to; Wire all 3 pumps separately into pump 1, 2, and 3 red power wire goes to front battery, mount circuit breaker on battery cover and then run it to positive terminal or one of the fuse...

Never seen one of these before. Trying to access fuel lines, videos online just show torx and nuts not these.

These look like crimp connections, do I need a special crimping tool or can I just close it with pliers? For Fore fuel system...

My car has active exhaust from the factory, but the actual active exhaust muffler/actuators were removed. So I need an exhaust and the two actuators, does anyone know the part numbers for the actuators? All I could find was JR3Z-6554-A but when googling this is showing me 2020-2021 and my car is...

Service manual wrench comes on and the car won’t take off in 1st it just bucks me back. Code reader shows P061B, any ideas? I took apart my roush intake to clean it and I sprayed the MAF with MAF sensor cleaner like 50 times and still happening. This is the 3rd time, going to take to dealer...

Service manual wrench comes on and the car won’t take off in 1st it just bucks me back. Code reader shows P061B, any ideas? I took apart my roush intake to clean it and I sprayed the MAF with MAF sensor cleaner like 50 times and still happening. This is the 3rd time, going to take to dealer...

What does everyone upgrade their base radio with? I was looking at the tomtop, but I'm not sure if I want to do it because it seems buggy. I was looking for something <$500.