Im sure this is a long shot but after multiple tries emailing frap and calling the tech line to no avail, does anyone have can protocol for the gen 3 coyote ford control pack pn M-6017-M50B? Im trying to pull data from the ecu to an AIM dash/data. Thanks!
does anyone know how to disassemble the outer cv joint? The inner one is cake. Im rem treating all the cv guts and reassem with good ultra high melting point grease as im killing them after 2 races. Am I missing a clip or not banging it hard enough? I can't get it apart. Thanks!
2018+ mustang gt. Need help on this one. Anyone have a diagram on how to wire the existing wiper motor for single speed on off toggle switch? Factory wiring manual says it has to go through the oem steering column electronics and stalk to work but that's been removed from the car and a...
Im putting together a group buy for Aim stuff - dashes, cameras, etc. If anyone is in need of anything PM me and I'll give the details. Looking to put this through in a week or 2.
$850. Brand new abs module that fits 2018 Mustang FP350S (and can fit other models/years). Ford pn M-2353-D. Very hard to get. Bought for race car project and didn't use it. Shipping available. Located in Marietta GA.
So put a new set of fp hubs on a 2020 mustang road race car (M-1104-B) and after 1 race weekend (in the rain no less with too many fcy's) I was prepping for our next race at vir and noticed what I think is excessive play in the bearing. I called FP and they sent me another set under warrantee...
Ok so a little help? 2018 mustang gt road race car new build. trying to get on track this coming weekend to shake it down. Stuck on ride heights as what to set it at. First mustang ive build and run so kinda clueless on this. Mcs coilovers f/r and using 25mm front spacers to clear the...
Can anyone tell me on a 2020 mustang (or any 18+ mustang) what, if any, changes would make the taillights not work properly? I have no turn, run, or brake lights. If I turn the hazards on only the front flash. if I turn the park lights on the rears are brake light bright and turn it to...
Hoping someone can get me some answers here. 2018 mustang GT full road race build. Ditching the stock fuel tank for a 22 gal fuel cell. my question is about the fuel pump / fuel system. It's my 1st foray into the mustang world so a little clueless no matter how much I search about the fuel...
so I just got forscan and the new pieces to hook to the car. I am wondering if I can use it to remove the airbags and seatbelts so I can unplug and depin the restraint module. It's a full on race car but needs to use the factory wiring harness (showroom stock type rules). I haven't dived into...
So possibly a dumb question but are the factory motor mounts (2018+ GT) liquid filled? If they are, what would a good mount be for a full on track car? I don't care about nah and all - just don't want something so stiff it cracks the mount/block/etc. Had another car with really hard urethan...