Sponsored

Search results

  1. Small oil leak.

    dealer said loose bolts, but replaced the gasket to be "safe"
  2. Small oil leak.

    see http://www.mustang6g.com/forums/showthread.php?t=80897 and http://www.mustang6g.com/forums/showthread.php?t=22476 ford fixed my under warranty free of charge
  3. Check your valve cover bolts

    Mine was far back on the driver side
  4. Headers smoking

    Ford confirmed that the driver side valve cover was leaking, they will replace the gasket. all covered under warranty.
  5. Evaporator Core Failure

    I thought the AC compressor is alone on it's own belt. Maybe I missed something...
  6. Headers smoking

    I got a chance to get under the car tonight. Here is a better picture of the oil on the exhaust manifold. http://imgur.com/a/ynCN9
  7. All rear seals bad???

    I noticed that on my car too, but only where the driveshaft connects up. the stain was pretty dry and i have had it for several thousand miles and doesn't look to be getting any bigger.
  8. Headers smoking

    I finally found a thread of of other people having the same problem. http://www.mustang6g.com/forums/showthread.php?t=22476
  9. Check your valve cover bolts

    gahhh I am having this issue too. discovered it because of smoke coming from the engine and burning oil smell
  10. Headers smoking

    Just got a better look at. Found oil on the manifold toward the rear of the . block. You can see it in this picture, oil right were the header bolts up to the block cylinder 8 I think. http://imgur.com/a/9a6jZ. I have an appointment set up at ford tomorrow. I will update how it goes, hopefully...
  11. Headers smoking

    To start I have a 2016 GT PP with 21k Miles. For the past week or two I have noticed a burning smell (Smells like burning rubber mixed with smoldering engine oil) at stop lights when i have the windows down or have the A/C pulling in air from out side. This morning I noticed faint smoke coming...
  12. Ford Throttle Body Lawsuit

    looks like a typical money grab lawsuit
  13. BMR Tech Tip: Check those axle-to-spindle retaining nuts!

    I checked my wheel bearings all fine, I replaced the nut on the creaking wheel with CCPZ-3B477-F. The new one had some green stuff on the inside on the threads, maybe thread locker or anti seize? imgur.com/gallery/cqu4N I don't think the old one had any
  14. My VMP Performance Saga ***LONG READ***

    is this the "yolo douche bag" Alex?
  15. MT82 owners, whats your current mileage and if any problems?

    How was it stolen? I was under the impression that the keyfob makes it much harder to steal
  16. Getting new tires fiasco

    Just get nail polish most shops will screw them up
  17. BMR Tech Tip: Check those axle-to-spindle retaining nuts!

    Why use red and not blue? Wont red make it near impossible to remove?
  18. Tires for 19x10/11?

    im at a 40 offset with same wheel and tire size. mine barley clear with about 5-4mm of space. I'll be getting spacers soon
  19. 2016 GT MPG LOL

    17.6 after 20k miles





Top