Sponsored

Search results

  1. Forscan adapter issues

    It will work perfectly
  2. MGW - Do you like precision things?

    not sure exactly, would need to measure
  3. Dyno testing the New Cobra Jet Intake Manifold | Gen 1 vs Gen 2

    Some fancy intake designs do have good potential even if they are more complicated, an example is the intake of the porsche 911 gt3. Is there anything extraordinary special about the gen1 / 2 cobra jet intake that would cause it to make a huge impact but somehow does in fact not ?
  4. Future value

    That does sound familiar to buying assets on the stock market :)
  5. MGW Shifter and a high pitched whistle

    Regarding the vibration: Te MGW shifter isn't the source for the nvh, more a conductor for it, making it just more apparent and audible, of course. By the way, my ride got a PCM update on Monday. Since then it is much smoother will almost no vibration left in the high RPM range but also much...
  6. Future value

    (or to not fill it into the headlights, as you can see some people should read the manual more thoroughly)
  7. New Recall for ECU Safety Issues

    strategy before update: LR3A-14C204-ACC. After update: LR3A-14C204-ACE
  8. New TSB issued for 2020 Mustang 5.0L Built September 1 - December 1, 2020

    yes, quieter for me as well. I hope this can be fixed.
  9. Drive mode differences in 2022 GT w/6MT?

    with track mode ipc visuals the rpm bar will light up in red but you can also configure a separate shift indictor in the pony menu where you can also set the exact rpm. doesn't show up lc in mine with track mode. can LC be enabled automatically with drive mode ? maybe forscan ? if you want to...
  10. Hydraulic Clutch Line

    I have installed the clutch line by J&M Products a few days ago. Nice product and not too problematic to install. Gives you more consistent shifts but it will not solve all shifting problems. Next step is to switch to a new transmission fluid and after that will try to get a new clutch...
  11. MGW Shifter and a high pitched whistle

    Leaving the hand on the shifter seems to put stress on the shift fork mechanism. At least this transmits some noise from my assembly so I try to avoid it. Otherwise I cannot hear anything really concerning beside the normal shifting action sound. No heat is conducted from the tunnel through the...
  12. Euro tail lights

    I remember when it was possible to repair the light by just replacing a light blub in under 5 minutes. Let's wait for what the manufacturer or merchant are going to say.
  13. 4G Modem Disabling Instructions:

    Just FYI: Since a few months it is actually possible to modify and customize Sync because of the leaked jailbreak method. But since it is not open source this might be hard to achieve except for the smallest modifications. You could shut down the sync os process which is responsible for...
  14. Headers or tune first?

    If you have the part already it makes sense to install first then then tune. Usually I'd speak with a tuner first and explain what you want to achieve exactly before buying anything because they know all the options and combos and can recommend suitable parts for the intended target.
  15. Has anyone given thought to this monumental change that’s about to occur? In less than 2 years…

    #11: house insurance will be increased as well due to increase risk of fire.
  16. Has anyone given thought to this monumental change that’s about to occur? In less than 2 years…

    range: 30 feet. This would be an interesting topic for xkcd "what if".
  17. Has anyone given thought to this monumental change that’s about to occur? In less than 2 years…

    The Inflation reduction act seems to promote the domestic mining of EV battery metals. [1] [2] [3] And today I read this. They are on the move to secure the battery materials. I am sure other manufacturers will follow.
  18. Challenger and Charger are no more.

    Better battery technology is on its way according to this article: https://pubs.acs.org/doi/full/10.1021/jacs.2c01612 no more lithium
  19. Guys who ordered the SCHROPP Strut tower brace? Please chime in.... How was your experience?

    It must pass customs which might be clogged up a bit right now. When I ordered the MGW shifter, I was contacted by UPS to supply all kinds of info for customs clearance which I provided within 2 hours. But to be honest the whole delivery was finished within 5 days after MGW sent it on its way...





Top