Search results

This makes me consider a carbon fiber or fiberglass hood. Unfortunately I hear very mixed opinions on those, especially fitment. Anybody with experience and a recommendation? The hood on my garage kept 2006 developed a paint crack probably associated with corrosion. Just seems inevitable with...

Factory speakers are terrible. Plan to replace the whole set, so pick any replacement that you can make a matched set. I used a three way CDT set (awesome, BTW), but any decent aftermarket speakers are going to be way way better than the factory. Seriously, I was shocked at how crappy the...

I'm a long way from needing a clutch, but this is intriguing.

If you're using an aftermarket amp and DSP, the "AUDIO AMPLIFIER" will go away. Your aftermarket setup will use the "Low Level" outputs from the ACM. You should go to the "Infotainment and Electronics" subforum- folks have already worked this out and posted solutions. Don't forget to correct...

https://www.mustang6g.com/forums/threads/mach-1-grille.158646/#post-3268777

What KingKona said! No way you should let the upholstery turn you off on a car that you otherwise want. You don't have to limit yourself to the factory offerings. Get in touch with Katzkin or Leatherseats.com or Roadwire and they can do all kinds of colors and patterns. Think $1K-$3K, depending...

Might be in this thread- https://www.mustang6g.com/forums/threads/the-what-things-weigh-thread.15864/

Since all of these reports say that the mirror housing and car are not vibrating, it may be something -inside- the mirror/housing that is vibrating. Do all of these cars have the autodimming rearview mirror? There might be something in there (the glass, a circuit board, electronics, LED panel...

Yes. Perforated leather in the center panels.

https://www.mustang6g.com/forums/threads/custom-upholstery.150580/

Still available 2023-03-14. Black leather upholstery from my 2020 401A convertible. Excellent condition. Put about 500 miles on it before my custom upholstery arrived. Convertible seats are not the same as the coupe seats- the front seat shoulder belt arrangement is different, and the rear...

If you care enough, I retrofit folding seat backs into my 2006 convertible. The basic chassis is very similar 2006/2015.

That's getting spendy. In 2014 a local shop quoted me $1900 for parts and labor to replace the top fabric on my 2006 GT. When you ask for convertible top quotes, be sure to specify what to replace- outer fabric, headliner, mechanism. You probably only need the outer fabric. The first time I...

I've had four Mustang convertibles- 88,96,06, and 20. No issues with heating or cooling on the 2020 here in north Alabama. - if it's 40F and sunny, I can put the top down, windows up, and crank up the heat and the heated seats. - If it's less than 90F, I can put the top down, windows up, and...

The factory setup blocks sub frequencies to protect the rear speakers from damage. Those factory speakers are... not great. You need to spend some time with the following thread: https://www.mustang6g.com/forums/threads/stereo-information-wiring-upgrades-etc.25501/ Looks like the factory setup...

The shape of the trunk lids are slightly different between the convertible and the hardtop. An S550 hardtop spoiler will not fit perfectly on a convertible, if it fits at all. Good picture and discussion on pages 2 and 3 of the following thread...

The shape of the trunk lids are slightly different between the convertible and the hardtop. An S550 hardtop spoiler will not fit perfectly on a convertible, if it fits at all.

MGW. MGW. MGW. Installation is not trivial, but neither are the results. I had an MGW on my S197, and now on my S550. I cannot say enough good things about them and their products. When I called them about the S550 shifter, the OWNER took my call and offered his recommendation.

I understand how most of the modes scale the throttle response. How does the AI mode work? Does it try to pick one of the other modes, or generate a custom curve? Sounds complicated, I would expect that my 6sp manual would try to get a different curve for each gear. Will this device be able to...