Search results

@Outlaw @RiotfunK You might have missed it, but you are on Mach 1 subforum. Mach 1 has Tremec TR-3160 transmission, and the corresponding MGW Shifter is the same one GT350 uses. You are running a different MGW Shifter on a different transmission, so feedback you may get here may not be relevant...

The way I read your second report (from the Ford shop), your front toe is out (-0.04° and -0.02°). I do not know what should be the corresponding inch measurement, but if you measured toe-in instead, I guess there is something fishy. In general, I believe the precision and reproducibility(!) of...

These are the factory "premium" non-HP wheels, advertised as "Magnetic" - just brand new and treated with ceramic coating. They tend to become black-ish in direct sunlight, and in an ambient/artificial light look more metallic/gray.

Your Mach badges and the bottom grill are exactly the same as on my (production) 2021 Mach 1 in FJG. :wink:

@HOWABOUT. Did you mean something like this?

I am not sure if you are being rhetoric or really asking this question, but the first owner is probably the best bet to know, the second owner is the second best bet :wink: . Just to clarify, if my previous formulation was misleading, when I wrote about that these types of additions were done by...

If it is a non-HP car then there are some bits added by probably the first owner. Here is how non-HP car looks (https://www.mustang6g.com/forums/threads/what-did-you-do-to-your-mach-1-today.171200/page-16#post-3511540). Note the rear spoiler, front splitter and wheel wells (no front fender...

There is some clearly some discrepancy between the FB post about the car and the pics. The owner claims it is all stock, while the car has clearly Y spoke non-HP wheels (you cannot have them on HP car from factory) and HP front splitter (the second lower front lip) and the front fender plastic...

Good to know, I have just scheduled a diff inspection at a dealer on some Monday in April :wink: .

The crux is in your statement "if most people that track their Mustang are like me", while you actually meant "if most people that buy Mach 1 are like me". Well they are not and that is why they bought Mach 1. :) I was on a verge of buying Mustang since Ford introduced gen 6. I missed the...

I guess it depends on the PPF (and also the decals!), but the common reasoning I had at the time I was deciding to have it fully covered (while being fully unaware that I am lucky because of having FJG decals) was along this line: If I have to remove the PPF because it got damaged to the point...

@Whitedevil95 You might want to read my take on the topic (already a summary) here: https://www.mustang6g.com/forums/threads/mach-1-ppf-what-to-do-with-the-hood-stripe.188550/post-3786305 In short, FJG is fine, other colors not.

Since we are resurrecting this thread, I might as well add some observations. I had some Steeda parts added before the season - ultimate stop the hop kit and diff bushings (red ones). Since then I have: a) an audible "clunk" when shifting in low speeds/velocities. E.g. shifting from 1st gear to...

My Mode gone is no biggie, but if you have your keyless entry turned off, I would check it too.

This Ford Performance charger looks dangerously close to my CTEK MXS 5.0 charger 🙂 .

I believe for what concerns the transmission fluid change, and in particular the variant with the cooler, the emptying should be done automatically, and the filling should follow the procedure described in the user manual. Which suggests that you should be able to fill the cooler with the "cold"...

The question is if this was a generic observation across the whole range of Tremecs or if they did recommend those for TR-3160 in particular. There are a lot of Tremecs out there, but TR-3160 was (as far as I know) the first which was specced by Ford with an ATF LV oil.

I have recently observed a half-dry oil patch around the drain plug, but it did not occur to me to attribute it to a leaking pan. Instead I thought it was a drain plug which was leaking, possibly during or after a track session due to the heat or vibrations. Saw a similar oily stain around the...

@NHMach1 I checked their site and did not find your wheels there. Actually did not find any Mach 1 wheels and for broader Mustang category only 1 set in 20" size. So do you need to directly ask for particular size/shape, or how did you get yours?

I do not know, but could "unique tuning" be simply attributed to the different springs or sway bars? On the other hand, as someone mentioned in this thread that the magneride could somehow "adapt", it may as well mean that there is one "universal" programming, which just behaves (slightly)...