Search results

Killer stuff, Guy laid down some beads! Very clean work and fast turnaround.

@NGOT8R look at this. If I end up wanted to leave the fore triple I’ll go with the ID brushless setup when big hp comes around. very cool

Wow thank you this is exactly what I was looking for.

any photos of the new fuel pump, system setup? Still on a stock tank or custom cell?

I also have a trunk rust issue. I’ll be tackling when the parachute 🪂 gets installed. Good info @NGOT8R

Eventually that will leak and you may turn that whole section into an AN fitting. I got tired of replacing O-rings 😅 but it’s easy to fix

Line to BOV, Mac Valve, Fuel System Regulator and another if you have a Hobbs Switch, and Boost controller Then Brake Booster Line. Can you show the entire engine bay? I have a similar kit.

okay I sent a message to your inbox and email. Thanks TJ

I’ll post an update if they reply. I hope things turn out the way I’m hoping given that was not my error.

I have been through something like this too. The thing that may save you. If you have one of them you may be able to source one at ace hardware or Amazon. Steeda doesn’t custom make a lot the hardware. Unless it’s something extremely specific you can probably source it on your own and avoid the...

I wanted to get some feedback from the community to see if I’m being unreasonable here. I recently purchased a set of Steeda Mustang Pro-Action Drag Coilovers with the 162 lb. spring rate for Forced Induction cars. After getting them installed and paying for a professional custom alignment for...

Once I get this installed I’ll get some sights and sounds. Just need to figure out the connection situation to mate up to the back of the turbo system.

Hey folks I ordered an x-force valved exhaust for my twin turbo mustang; the full cat back. Order came in extremely fast! However, xForce does not offer the connection pipes! I am sure I’m not the only one in this situation. Curious if others are just buying a set of vbands and pipes and...

nice work!

funny that was my plan. You can run 9.0 with no real safety equipment. Once I hit 8.99 on the glory run then I’ll think about investing. Good stuff !

Dang man you didn’t spare any expenses!

@16RPG_Turbo what’re your goals? Low 4s 60-130 8s in the 1/4?

Really the motion can fumes are that bad? Where was it mounted? I’ll have to check your photos and see if I can spot it.

Dang I looked online and I saw they have downpipes! I wonder if they’ll let me buy some

How much was it to get the vband clamps on the exhaust?