Search results

New and never taken out of the box. $120 Shipped PayPal

Never installed. https://www.kelltrac.com/IRS-Subframe-to-Chassis-Stud-Kit_p_24.html $100 Shipped PayPal

New Keltrac differential bushings. $230 Shipped PayPal

Dragy DRG69 $70 Shipped PayPal

This will replace the cluster with the gauge that only shows vacuum with one that shows boost and vacuum. It was plug and play on a 2019 GT PP1 with Whipple. I broke a clip on the back, but it is common to do that and the screws hold it secure without any rattle. $120 Shipped PayPal

Selling Steeda clutch assist spring perch, Steeda clutch assist spring, SR performance 90lb spring, and stock spring. I'll toss the stock perch and the extra Steeda spring into the package. $75 shipped for everything. PayPal

Ford Performance carbon fiber was installed and I preferred the feel of GT350 knob, so removed it. GT350 Knob was used for 275 miles before I sold the card. It has been tapped to 12mm x 1.25 so it can be used on stock MT82 shifters. I used a jam nut to keep it from going on too far and in...

Sold the car, so no longer using. It has been removed from my HPTuners profile. Prolink was never used. $300 Shipped PayPal

Ford Performance catch can. M-6766-A50A On the car for 275 miles before I decided to sell the car. $100 Shipped PayPal

They replaced the degas bottle for me 2 times because the 1st replacement was cracked at the bottom where the hoses connect. The 2nd one stopped the leaking, but when I filled it much above Min when cool, then it would just vent out of the cap once it warmed up. Made me crazy trying to figure...

Sorry about that, I just replied to your pm.

It's really not bad. It's basically just a batch of bolts. The worst part for me was dealing with the tight spots and being stupid enough to do it in 95 degree heat. I've attached pics of the installation instructions.

Includes all of the following books: The Tuning School for Ford Coyote using HP Tuners. The Tuning School Ford Transmission Guide for 6 & 10 Speed Automatics using HP Tuners. The Coyote Cookbook for HP Tuners. Ford Coyote Engines How to Build Max Performance by Jim Smart Designing and...

Uniden R8 radar detector. Used 6 months. Works great.

MFP 6-RIB Crank support kit, used about 400 miles. Some light scratches on the front. $475 Shipped.

5 Bolt pulleys for Whipple Supercharger. All are new, never used. 3.875 and 3.75 are Whipple, and 4" is Griptec. $85 each shipped or $225 for all. New, open but not used, MMR OPGs $90 Shipped New Gates K060828HD(green) $30 I use PayPal

Were you able to fix the issue? My 2021 is doing the same. No heat on both seats, but cooling works fine. DTCs B14BA:11:48, B14BB:11:48, B14BC:11:48, B14B9:11:48.

My pic isn't great, but this is the SP2s in gloss black:

I did do them at the same time, and it really wasn't as bad as I was expecting. Most of my wrenching experience is just dirt bikes and ATVs, so I was feeling pretty intimidated, but since it isn't a daily driver, I was able to take my time. For me, the worst part was getting a new oil pan...

I've been running mine for almost 18 months with nothing more than what came in the kit, and I have no complaints.