Same here. I tried unbolting at the firewall with no luck. I just tugged on it until it broke loose. I used the same Steeda kit to plug both ends.
Iāll second thatā¦and at the same time I removed the surfboard engine cover tooš
Mine have been on for about 3 years now and the only issue lāve had is the front ones developed a gap which would catch small pebbles between the fender and flap. I used double sided tape and problem solved. š
21 GT and took delivery 4/1/21 and itās a DD with 79,649. I put 40k on it in 2 years taking several extended road trips.Still on the original brakes tooš
Now that mentioned it itās the same around here in MA too but itās mostly the ricers/imports. And of course those fart can mufflers are common too.š
I was recently at the dealer for an oil change and inquired about getting the transmission serviced. They quoted me $695 to drop the pan and change the fluid, filter and gasket @ 2 hours labor and $300 to flush. Theres a performance shop not far from me that does my alignments, so I'll get a...
9. Dropping your car off at Towne Faire Tire for a few hours and finding out a few days later the tech took the car for a hot lap behind the mallā¦.then having the manager lie to your face when confrontedā¦.needless to say I now go elsewhere and wait.
Iām at 80k on my daily 10R80 21GT and have been thinking about changing the trans fluid even though thereās no problems. Then I looked at the maintenance schedule in the owners manual and itās says change at a 150kā¦Iāll probably wait till I get to a 100k.