Search results

On his facebook, he stated that the testing and dyno will be with velocity stacks for both setups and normal air filters for both setups!

Has anyone tried a centrifugal supercharger instead of a PD supercharger?

I ran the fk460 A/S last fall/winter and they were great—305/30/20 square.

GT500 borla atak has 5 inch tips. I have it

I have SVE PP2’s 19 x 11 square and velgen classic V2’s 20 x 11 square. I didn’t have HP wheels as I didn’t have the handling pack, I just went full Steeda haha

I have dual rates and their competition sway bars but added the ride height spacers for more clearance since I run 20 x 11's and 19 x 11's up front. Also -2.9 upfront. No rubbing on my 20's since the spacers were added but didn't try the 19's without the spacers

Hey! Which LVA splitter is this? I see they offer multiple on their site.

I have a corsa double h pipe, 2 vibrant resonators welded on and the gt500 borla atak axle back. It mellows the catless LTH

I’m currently running 305/30/20 square but I get slight rubbing on speed bumps but that’s it. This setup would be a little taller than my current setup(27.2 vs 27.4)so I’m wondering if I’d rub more haha. I’m also on -2.7 degrees of camber up front

19 x 11 with 305/35/19 fits the front without rubbing? I have a spacer/extended studs already but I’m looking for another set of wheels for the summer.

I am using OPMUSTANG hub and wheel centric spacers, slip on because bolt on isn’t safe for hard usage.

If my knowledge is correct(it may not be), the spacer is needed to give the ET 52 wheel an effective offset of ET 27, or else it will touch the strut from being too tucked in. The studs are needed to give enough length to utilize the spacer and have enough stud for the lug nuts

I have 305/30/20 square with 20 x 11 ET 56, extended studs and a 25mm spacer. Pics for reference

Mach 1, catless headers, corsa double H pipe and gt500 borla atak axle back here. It’s loud.

I have a double H pipe (corsa) because I wanted a three inch pipe, but I don’t know of any advantages

I’ve had a Uniden R7 since I bought my mustang and at the time, I was working in NJ. The police in NJ love to sit in the trees, lights off just waiting for you to go a little faster than the speed limit on empty highways(I worked nightshift so my commute home was always empty). The R7 combined...

If you’re interested in selling them, how much would you want for them? I’m in Delaware but willing to drive for a good deal

That’s good to know! I thought it was 2.5. I didn’t try it because I already had the corsa double h pipe on the car so I sold the switchfire. It does sound awesome based on the videos I saw!

It’s loud on cold start but with quiet start and quiet mode from active exhaust, it’s very manageable

I have the GT500 borla atak welded to the corsa double H pipe because the switchfire is 2.5” despite being advertised as a 3 inch exhaust also with LTH