Search results

Autumn skies are beautiful

those rims are horrid

it does the job of deflecting debris / bugs .. i had this put on after i PPF the front section of the car .. Rakuten has a 20% off code on ford.com "SHOP624"

reddish sunset before a storm

Opened her up over the weekend , and realize the weird 5.5 mm socket at the two ends (had to go out to get them 5.5mm sockets ) .. . the rest were piece of cake the setting sun does the grill leds injustice ..

had a bunch of these 18x7mm FORD emblem Aluminum type sticker .. so stuck them on the center caps

Met my other half 😅😅, Mines the one further back in the pic … he pulled up beside me as I was parking 😅😅

I hate seeing the slight rust on the rear rotors … removed the rims and sanded the rust n primed it , sprayed it Hammer black with two layers of clear coat and looks so much better now btw 8” sono tubes is just nice for the rotors saved me covering the rest of the exposed areas

for the convertible , i assume for the rear you still place the jacks on the axle between the braces

added the Mach 1 Front Fender flare , bought the PP sheet off Amazon , cost about $8 for 4 sheets - similar material as the wheel well material made a cardboard template first before actual cutting and sanding down the piece

Urs is really clean , I just ordered the fender flares as there is a 15% discount on ford.com

Had this Ford GT500 rear splash guard kit sitting in the garage for close to 6 months mine vehicle is a 2022 GT Convertible … finally had time to install this. Slight modification needed but it was a simple trimming of the bottom bracket(which the GT rear bottom bumper was slightly different...

sorry for using this thread.. but if its for a general Dyno just to get a baseline ... anywhere in New Hampshire??

noted .. and agree .. body matched paint .. will have to get one of those customs paint cans ... for high temp else to keep the lower all black .. black calipers ...

thanks will check them out

ok this figures .. i kept thinking the X pts were no no to be jacked ...

Thanks Sir i was contemplating to paint the calipers red .. ... black is better? i have cheap black lugs cover .. lol...looking around for black lugs ...

added ppf film on the lower door and rocker panels .. installed this OEM "wing skirt" from ebay OEM Skirt :

had them installed last night .. after installing PPF film on the lower rocker panels ... as i noticed the "fin" was touching the lower body