Search results

I have BMR springs that lower it about .75 to 1" in the front and .5" in the rear. So there is still a .5" difference, but appears to be what everyone is running on the track.

Looks like everyone is good with the the smaller diameter of the 275 (1.3") or of the 285 (1"). With stock diameter 275/40ZR19s (27.8") I'm getting about 132 - 135 mph in 5th at 6500 rpm. Anybody have any idea what top speed is in 5th with 275/35/19s? I want to square up for track day and 9.5"...

Road America April 25th

Will 2008 GT SN197 fit my 2015 GT PP?

Anyone use a Paxton/Vortech style SC for track day on a regular basis? Any heat or blower reliability issues?

I'm going to put it on the rack and get new readings on the alignment settings. I'll post once I get them. I don't have Camber plates, so haven't adjusted it. Thanks for the suggestions. I'm always guessing at tire pressures. I'm going to check alignment settings all around, back off the Konis...

Update from my first track with the new suspension set up.... I was able to cut 6 seconds off of my previous lap times with the new set up!! In May I installed BMR SP083 spring set, BMR adjustable sway bars (middle setting), Koni Yellow adjustable struts and shocks and G-LOC R10 front pads on my...

I finally got to install my suspension. I bought the parts last fall. Between work and home projects I didn't get a couple days to work on it. I got the SP083s, BMR adjustable sway bars and the yellow Konis. I took it on a 6 hour cruise yesterday to see family. I had the Konis on full soft. My...

R10s on order. Installing my suspension you guys recommended from last fall. Have the front installed, work and home projects delayed the rear. Hope to finish this weekend. BMR Handling springs, BMR adjustable sway bar, Koni Yellow adjustable struts and shocks. BIR trackday on the 1st of July...

Where do you guys order your GLOCs from? The Gloc dealer list says it hasn't been updated in 3 years. I'm in MN, the dealer listed on lists Nissans. Has anyone checked the price of the stock pads... >$380 for the front set!

I have 2 bullet glass packs in place of the resonator and Pype Bombs for tips instead of mufflers. I also had 26" pipe installed in parallel with the Pype Bombs as a Helmholtz 1/4 wave to cancel any drone. It sounds great, deep tone with good rap. On the track, the guys say it sounds like its...

Has anyone seen "The great drag race 8"? One can run a 10 sec 1/4 mile while sipping an ice coffee thru a straw. Where's the challenge, skill or thrill in doing that!

Any dumb arse can ride in a self driving car!

I like it! I'm going to go with the Eibach sway bars and Koni's to control the initial roll (like Norm said) and the BMR SP083 kit to balance the system out, control braking dive, acceleration and steady state. The PP1 is really very good, I'm going to go for that extra control. Thanks everyone.

Thanks for the responses. I going to switch to either the OEM GT350R springs or the BMR SP083. More likely the OEM's. I like the linear springs and it sounds like the Koni's soften up enough to give a good ride quality. I like taking it on roadtrips with my wife and don't want to get to harsh...

How is the daily ride quality of the GT350R springs? My plan was to use Eibach Pro Kit, Eibach sway bars and Koni Yellows. I liked the idea of the BMR SP083 kit lower the front 7/8" and back a 1/2 inch. A little more rack would look good. I use mine as a daily driver, track days and...

Post up your lap times and data using the format below: Year/Make/Model/Trim: (ie 2016 Ford Mustang GT base w/ PP) Track/Course: (ie Road Atlanta, VIR, COTA, Roebling, etc) Best Lap Time: (ie 1:43.99) Tires (Size & Model): (ie 275/30/19 all four corners, Hoosier A7) Feel free to add videos of...