Search results

'TRAKIT' because we do indeed track it. Found this photo of our car on the Ford Performance site.

Should be a clip on the wire that goes into that slot on the strut

At the track

Drove the snot out of it for three days straight

If the 24 truly uses a GT500 oil pickup tube then you’ll need to swap pumps as well. Our stock pumps use a pickup that’s integrated into the plastic pan and a slip fit at the pump. The GT500 pickup bolts to the pump as a separate piece.

In track mode…

So I also wanted my splitter to be easily removable, on for track, off for street. I tried the aluminum rivnuts and found that they didn’t really crimp around the plastic as you’d expect, they just push the hole larger as you compressed them and never really crimped. I ended up using this...

I have the same issue with Pandora in both my M1 and F150. Tried deleting the App and reinstalling it but no improvement for me. Curious if that sticks for you.

Loud and proud that it’s a track car here…. but I do lIke the small track map stickers for tracks you’ve driven.

Would be interesting to know if any are preproduction TTxxx or PPxxx chassis numbers.

Matt looks great and thanks for sharing. Was it not possible to make the overall stripe wider and run the gloss black and orange along the side of the vent? Make the matte black as wide as the vent.

Found one.

Mach 1 uses the Gt350 air to oil cooler. Issue with these is they get easily damaged due to location. Best route is to have ford service department pull a full repair history like others have suggested. I would pay attention to how many miles since repairs to cooler. If recent then I would...

Rear tow hook because we track the car. Didn't like many of the available options so made my own. It a 1/4" plate that sandwiches between the bumper beam and the body and has a bracket that runs forward to another body attachment to help with the pull loads. Hook is removable if desired...

Couple more updates... Installed the S650 Strake air deflectors. There was discussion on how to make them work with the Mach1 belly pan. I simply trimmed the belly pan a bit and put the strake over top. It then shares a fastener and then gets 3 new holes and fasteners on the subframe. I...

It’s a 1/4” plate that sandwiches between bumper beam to body attachment. There is also an attachment that runs forward for another body attachment point. P

Looks like a great solution. I kinda had the same dilemma, bought the FP hook and didn’t warm up to losing the back up light. I then bought a universal flat hook with the intention of mounting just like you did having it poke through in the same manner but was afraid it’d look like a red...

Exactly, and it needs to be wider than the vent. The vent should fall within the matte finish part of the stripe.

Fabricated and installed a functional rear tow hook. Didn’t like available options .

Very curious how your decal solution comes out, look forward to seeing it. Love the hood but want a correct looking M1 hood stripe.