Sponsored

Search results

  1. We are being tracked by our cars

    I don't want or need any of the GPS/telematics "benefits" on my manual transmission equipped 2022 Mustang, so I replaced the two-lead Shark Fin antenna with a smaller single-lead puck style antenna. It's a simple ten-minute swap, the hardest part for my old bones was crawling in the back seat...
  2. What did you do to your Mach 1 today

    Link? Any idea if they also fit the Ford Performance/GT350 Aluminum Brace?
  3. Would you buy a 2021 GT that Ford bought back for PCM failure and then fixed it ?

    Is the title dinged or affected by the buyback action?
  4. Tried coating the belly pan? plasti dip, or under coating something to protect the brittle plastic? Stop breaking into pieces

    TBW Aluminum Engine Under Tray for 2015-2023 Ford GT Mustang (S550)
  5. Mach 1 Racing Stripe Extension over the top - a work in progress

    I've got a spare hood stripe that came with the decal set, if you want it, but it says Mach 1 just like the OEM stripe.
  6. Mach 1 Racing Stripe Extension over the top - a work in progress

    Thanks, I waited a long time to get a car, just for me, and after numerous mods to tailor it to my "wants" I thoroughly enjoy driving it, mostly because rowing the Tremec 3160 close ratio gears through an MGW shifter is that much fun and takes me back to my youth. Chat GTP did an image edit to...
  7. E85/bolt ons

    E85 woke up my Mach 1 and I'm happy with the power level and ability to maintain traction and overall drivability on street tires. I was considering an ESS boost upgrade to keep further supporting modifications manageable for daily use and occasional HPDE track days until I got a ride in a...
  8. Mach 1 Racing Stripe Extension over the top - a work in progress

    I had a local shop install AutoDesign-Shop decals over the roof and on the deck lid of my Mach 1 and the 3M vinyl is top quality. The proportions of the intended deck lid stripe, terminating before the HP Spoiler, didn't look quite "right" so we extended it through the spoiler to the end of the...
  9. 3d printed strakes (wip)

    The OEM air vanes are rubberized and durable, Ford did a good job on this add-on for the Dark Horse. I don't know how much aero benefit it contributes to underbody air management but I'm confident it can't hurt and it sure looks the part to anyone curious enough to look under your car. (I added...
  10. Active exhaust Harness failure

    It's a mass produced Mustang with sloppy build quality, I'm sure no one's feelings would be hurt by a BFH on the pinch weld.
  11. Should used car dealers suck?

    Cars are nothing more than a commodity most dealers will say and do anything to flip. Not allowing a third party inspection before the sale is a red flag to walk away. Carvana is an especially good dumping ground for abused or damaged enthusiast cars. Try to find a private seller where you...
  12. Parking brake adjustment issues

    (got to get Spell-check enabled)
  13. Parking brake adjustment issues

    I'm not aware the S550 platform ever used a self adjusting ratchret contraption on the handle like older generations, is the self-adjusment feature built into the caliper corkscrew mechanism?
  14. 2015 right rear brake noise?? HELP!!!!!!!!!

    How frustrating, good luck discovering the root cause. I've been considering the Willwood kit as a pricy splurge, mostly because floating calipers on a performance scream cheap. If you go with the Wilwood kit, please post installation feedback, I saw a video that looked like the E-Brake cable...
  15. Steering wheel install gone wrong - advice wanted

    I couldn't get my plastic trim to fit properly until I realized it was interfering with excess leather that had to be trimmed away like it is on the OEM steering wheel. Once the interference, as minor as it was, was eliminated, the plastic popped into proper position. I don't know if that's...
  16. Any test of Performance gain or not by opening the driver side faux driving light/fog light?

    The engine can only use so much cold air and it doesn't matter if it takes the S-path from the inlet next to the fog light opening or a direct shot through the fog light opening. (I removed the cover and noticed no change on the butt dyno.) You might pick up one or two horsepower switching to...
  17. Steering Wheel Counterweight

    I've wondered the same thing and, knowing how cheap Ford is, why would they spend the extra money and labor for an add-on piece that's rubber isolated? These cars have adjustable electric power steering so I don't see how adding weight would be necessary for proper "feel" so, maybe there is an...
  18. Gen 3 spark plug debate??!

    I switched to E85 on my naturally aspirated 2022 Mach 1 and I have no intensions of ever going back to 93. Is the optimal plug gap and heat range still the same as stock?





Top