The car has a clean bill of health (knock on wood). Serviced regularly at the dealer 28k miles . The car has/had ICE cold ac and I'm in South Florida where it has been 94-98 degrees here and yet the ac has been better than any of my other cars.
Yes that is the fuse that went . I'm going to...
Here’s my fuse box. Every diagram I’ve found online looks different from mine, so I’m not sure if it just is what it is. The pic of the strut tower brace is just to show the ground underneath it, since that’s the one I removed. And finally, I threw in a pic of the R just because :)”
Need Some Help – No A/C After Spark Plug Swap (2019 R)
Hey guys, I could use a bit of help with something that’s stumping me.
Last night, I swapped out the spark plugs on my 2019 R. Everything went smoothly—gapped all the plugs to .38. For the last one on the passenger side, I had to...
Last night I installed the PMAS intake along with about $150 worth of DEI insulation panels and gold foil — even wrapped the elbow. I was expecting solid gains, but honestly, the results were disappointing. The intake air temps (IATs) were awful — cruising around 40+ degrees over ambient! Even...
I just installed the "short ram air intake" for the gt350...man what a piece. I wanted a Steeda closed system, but they don't make one. Stock the intake levels out at +12 ambient here in SFL. So last night I wrapped the entire elbow in gold foil, all the sides of the intake in DEI insulation...
I wanted to do a set of the Celeritech headers for my R but they don't make any...yet, I watched a vid on YouTube of a set on a cammed C6 Vette and immediate I wanted a set but they aren't making them yet, glad you posted this.
Today I removed the Orion XTR 10'' sub I put in the SKAR S550 1.0cuft box which sounded wayyy better than the stock BO setup, and much better than the XTR in the stock box btw, and reinstalled the stock box and added the DD Audio Redline sub with 4oz of polyfill and boom I am convinced this is...
How are you liking the thickness of the wheel..looks to be much thicker than OEM. I love the Alcantara Airbag btw, where did you source this monkey from?
For Max weight savings I would have set the battery in place then put in contractor grade garbage bag and trimmed it down a ton so that the perimeter over hangs the edges by 3" or so and used expanding foam in the bag holding the battery in place. Once dry I would attempt to remove the bag from...
From the dynos I have seen the CAI don't do squat until like 7500 rpm then its a whisker of powa...things may change once air is being assisted at highway speeds..either way we all know the hp/$ doesn't make much sense here but as I fall asleep at night I want to know I have checked the air...
I absolutely love this car — it still even smells new on the inside! 😄
I picked it up from a dealer in Missouri, and honestly, the entire process was smooth and painless. The only things I need to do to make it perfect are:
Replace the passenger-side mirror turn signal
Install a new set of...
I watched a vid of a guy who added the 91mm ported TB and did Dragy test vs the stock 87mm and with the TB it averaged about 0.3 seconds faster and a reduction of 70 feet to go 60- 130mph with same day, fuel ,DA, and road elevation so I gave it a shot, granted a Dyno most likely won't show a...