Search results

Yeah it's a oem pcv valve

Long term report. I can say that after more than 10k km my GT350 consumes 0 oil anymore, considering it was burning a liter every few hundred kilometers

Okay, I've got the setup running. It reads the OSS speed from the new 20 tooth flange. I'm using a Dakota Digital SGI-100BT (which, to be clear, shouldn't be used for ABS/PCM sensor data, it specifically says not to, but I had no other option). I scale the signal down by 0.6 so the PCM still...

After wrist surgery, I’m back at it, still working on the frustrating VSS/OSS issue. At first, I tried using a Schmitt trigger to clean up the signal into a proper square wave, but I’m still getting the same random dropouts lasting about half a second. That makes me think it’s not a signal...

Ok couple of updates. Drove the car for around 1000km so far so good)! I'm currently in the process of making the oss sensor behave correctly for cruise control. In the TCU software i can change a couple of settings. (VSS=OSS) 1) VSSPull Up 2.2k ohm (active) 2)VSS Sensitivity Voltage (currently...

It is. Last year between Stuttgart and Munich.

Only if you don't go too far to the north( ͡° ͜ʖ ͡°)

Our personal mexico here is germany hehe

Drove to the Alps to test the auto gearbox.

Actually passed the technical inspection today (TÜV) If someones interested the car got 25 kg (55 lbs) heavier.

First video is how the virtual clutch works and the second one is the latest run from today after the latest tuning session. I'm pretty much done with everything. I might post another video of a run but so far thats it (:

To clarify this is were the sensor sits. (On the other side) Also you are missing the small rubber insert.

Haha i destroyed mine a couple of days ago during my digital clutch modification. Manual cars have 2 sensors the neutral safety : (6G9Z-11A152-A) and the cruise control deactivation : (4M5Z-11A152-A) which looks like the one in your picture. If it is the cruise control deactivation sensor the...

Tested the paddle shifters today. I also finished the virtual clutch. (:

Paddle Shifters are mounted! The paddles themselfs are not the final design but i ran out of the right filament and they are good enough for now. Paddles and clutch pedal sensors are wired in and are already functional. The only things missing now is the mount for the clutch pedal sensor which...

I also had mine changed last year.

I like both though

Finished the outside of the car. Everything works and no more errors on the dash. The shifts are smooth in program mode 1 and no more weird gearbox sounds. The last things i do is the clutch pedal linear position sensor which i already have and the paddle shifters that arrive tomorrow. I also...

Finished setup. The stopper is printed in TPU and the plate in PA-CF

The stock pedal spring stays in place. The other Spring should approximatly have the same force as the hydraulic pressure on the pedal. So i think mechanically it should be fine. -knock on wood